Rear Axel No-Slip Locker

[allwayssideways]

Hi guys

I am looking for a long time now, for a looking diff for the SRT 10 Reg Cab.

Stinker told my, there would be only ONE way to do it right -change the complete axle.

So, now someone offer my a :

Dana 60 30 Spline C-Clip Carrier Powertrax No-Slip Locker

for 439 $, with 200 $ fitting costs.

????????????????? Could someone explane that to me, please? :dontknow: :dontknow:

Marc

 

[Bone]

Make sure it is a Super 60 with C-clips. I never found a vendor who could confirm we could install it. ...one way to find out...

http://www.vtcoa.com/forums/showthread.php?t=13225&highlight=dana

 

[JTS VENOM PERFORMANCE]

It may be a new part:dontknow: but I will gladly check into it

I know Bone and the rest of us looked for a year or more, actually Dana was gonna make one, then got bought out, and canned the idea

 

[allwayssideways]

@ Stinker

I dont know if they made one, but check it out and let me know?

http://www.tellico4x4.com/index.php/cPath/2880_226_244_3838

 

[Smokey]

talk to FSTJACK, i helped him install a "strange 60"...complete with locker and wilwoods, complete drop in and RTR

 

[Bone]

If you do buy, make sure the vendor will take a return if it does not fit your application, so all you will be out is shipping cost. Not all vendors will.


http://www.tellico4x4.com/index.php/cPath/2880_226_244_3838

http://www.tellico4x4.com/index.php/...0_226_244_3838

The 92-0460-3005 is the same one I researched awhile back.

 

[JTS VENOM PERFORMANCE]

ok here is the answer I keep getting on this powertrax, "it will not work" after you remove all the clutch pack and so on out of the stock carrier, the power trax unit want fit, the oem carrier is too wide for this uniit in our oem axles.

Now you can jsut welld up the spiders tho

but seriously, if anyone wants to askem , you are welcome to contact DTS, just got off the phone with them about it, and well , they say our oem carrier is just too wide to accomidate the powertrax unit,

thanks dodge

 

[msdnga]

Well, I stripped out the splines on the factory unit, so I am in for a spool!