Rear sway bar

[Ironhead]

Looking for a rear sway bar and hardware .


Planning on putting it on a QC .If I remember correctly they fit the QC also .Someone who has done this chime in !

 

[VENOMOUS1 RACING]

I created a conversion kit James to add them to our QC but its not a bolt up item. It comes with frame brackets for the links, mount plates for the bushing mount, poly bushings, links, hardware, etc.
Do you only have sway bar or do you already have links and other hardware too?

 

[Ironhead]

Looking to get the whole setup off an R/C .
If I remember right if QC is not lowered all I need is a bit longer links .
I can make the plates in our tool room on a Bridgeport at work that I will need for free .

 

[Chewbacca]

What is the difference between the RC sway bar setup, and the one from Belltech?

 

[Ironhead]

What is the difference between the RC sway bar setup, and the one from Belltech?

Belltech has these goofy clamps that go around the axel tubes .Where as the oem one bolts up to the bottom of the shock mounts .


I put a belltech on another hemi truck once and had to keep tightening up the clamps cause they would work loose after some time

 

[Chewbacca]

Belltech has these goofy clamps that go around the axel tubes .Where as the oem one bolts up to the bottom of the shock mounts .


I put a belltech on another hemi truck once and had to keep tightening up the clamps cause they would work loose after some time

Not to change topic of thread, but do you mean the bracket in pics 3 and 4? Because the part in pic 2 bolts up. Just wanna make sure since this was gonna be a future mod as well! :rock:

 

[Ironhead]

Not to change topic of thread, but do you mean the bracket in pics 3 and 4? Because the part in pic 2 bolts up. Just wanna make sure since this was gonna be a future mod as well! :rock:

No that is the way it should look belltech makes one that does not connent to bottom of shock mount.Instead it has clamps that go around the axel tubes