Rod info

[bigike]

Hey who has a spare rod lying around?

what are the dimensions? big end, pin end length.....................

 

[linemup]

I got one my wifes not usin itvfor sure$?!

 

[Tooloe]

i'v got 7 but they are in the garage an it's 5 in the morning maybve later

 

[Prof]

Big end: 3 3/8 across; 15/16 thick;

Pin end: 7/8 thick

 

[pokeytemplar]

Was that the info needed or do you need it miked.....

 

[bigike]

6.136" LONG?

 

[jtsdad13]

6.136" LONG?

i will resist, but i am sure others will not

 

[JTS VENOM PERFORMANCE]

stock rod length is 6.221, with a stroke of 3.96 bore of 4.030, with a pin size of .943.

nobody makes a drop in piston, and even if you find them its not a good idea to drop in a forged piston to the oem bore, the oem pistons have a tolerance of aobut 1 thousands, a forged piston grows at a different rate then the block so you need at least 4 thousands clearance,

nobody also uses a .943 pin, you have to convert to a .927 pin,


there are a ton of options out there but you need to know how to mix and match

 

[linemup]

stock rod length is 6.221, with a stroke of 3.96 bore of 4.030, with a pin size of .943.

nobody makes a drop in piston, and even if you find them its not a good idea to drop in a forged piston to the oem bore, the oem pistons have a tolerance of aobut 1 thousands, a forged piston grows at a different rate then the block so you need at least 4 thousands clearance,

nobody also uses a .943 pin, you have to convert to a .927 pin,


there are a ton of options out there but you need to know how to mix and match

This guys knows what he's talking about.

 

[JTS VENOM PERFORMANCE]

This guys knows what he's talking about.

thank you