ROE CAI Finally Available from JMB

[JMB Justin]

Sorry for taking forever on this guys and girls, Ive been really trying to come up with some new stuff in the past couple months to make up for my slacking. I dont have a pic yet, but this will use the same filter and airbox as my JMB NA CAI kit. The pipe will be changed and the coupler is modified differently than on the NA CAI Kit. The coupler comes off the TB and makes a 90 toward the airbox, then has a slight s-shape and goes into the airbox with the filter at the same location and angle as in the NA CAI kits. My cost is about $45 more, so the kit will retail for $295 in standard colors (add $10 for specialty colors). If you already have a JMB NA CAI and now have the Roe setup, I will sell a retrofit kit for $135. You would reuse your airbox, filter, and clamps from the JMB NA CAI. There will also be a bung mounted for the ROE W/I nozzle, a hole for the AIT sensor, and a hookup for the IAC. So what I want to do is have a one week only sale on these to make up for my delay. From now until friday 2/13/09 at midnight, These kits will be $260 for the full kit and $125 for the retrofit kit. I will post pics ASAP for everyone. You can order over the phone at 314-540-1541 or PM me with your address and I can give you a total to paypal to me.
Thanks!
Justin

 

[5_0_BAIT]

Not to be funny but I dont understand the date:dontknow:

 

[supercar1of1]

Not to be funny but I dont understand the date:dontknow:

I will SWAG that he means 02/13/09.



.

 

[JMB Justin]

Yep, fixed it
Justin

 

[LoveThisTruck]

Look forward to seeing the pics. Thanks Justin

 

[TNVIPER]

Waiting for pictures...dang Justin...you been buzy as a bee here the last few weeks..

 

[bigike]

Anyone who's done this already.

Does it sound or perform and different? I dont take away the trick whine do it ?

 

[nycstev]

'sbout time You got an intercooler?

 

[LitemUp]

Hey Justin how about something for us Paxton guys?

 

[bigike]

'sbout time You got an intercooler?

Intercooler CHECK.

I'd do it but I love the way the roe filter looks in the open scoop...........

But the JMB would look better once the hood was opened.

 

[Bone]

What if you don't have the stock airbox anymore?

How about an opening for a Meth nozzle too?

NOS opening or plate?

 

[tinygiants]

What if you don't have the stock airbox anymore?

How about an opening for a Meth nozzle too?

NOS opening or plate?

Bone,
I made a plate to go between the TB and the intake for the N2O. I think Justins kit already has a meth bung port. And I understood the kit to include a stock CAI box to go where the old box used to be.

 

[JMB Justin]

'sbout time You got an intercooler?

No intercooler sorry

Hey Justin how about something for us Paxton guys?

You guys have that nice DC performance setup, it would be hard to improve upon their work.

What if you don't have the stock airbox anymore?

How about an opening for a Meth nozzle too?

NOS opening or plate?

The retofit kit is for owners of a NA JMB CAI kit. You dont have to have any of the factory airbox. A water meth bung is welded into the pipe, so your ready to go, I can weld a N20 bung in too, no charge.

Took pics today, will try to get them up tomorrow, have a date with the Misses now so ive got to run.....

 

[eddie102870]

enjoy it while you can, it all ends when you say i do...lol

 

[JMB Justin]

Pictures:

This is the same as the kit will be except two things:
-AIT sensor will be in the black coupler
-IAC hookup will be on the CAI tube (this truck was already set up with a breather on the IAC, so I left it)

Justin

 

[EMT/SRT]

That looks great! Real clean! :congrats:

 

[LoveThisTruck]

I'll take one! Should probably get a CC while I'm at it. I'll call you tomorrow Justin

 

[Bone]

Justin, can you turn the filter to point strait down and without the cold air box?

I have my Accusump on the left side on the engine bay.

 

[TNVIPER]

dang that looks good Justin...:rock:

 

[JMB Justin]

Justin, can you turn the filter to point strait down and without the cold air box?

I have my Accusump on the left side on the engine bay.

I can do that, PM me with the location you want the filter and I can put a quote together.

Thanks Guys!