Seimans Deka 4532586 Injectors

[Prof]

Make an offer.

Have used these with my Roe Supercharger, Sean sent me a set with a different spray pattern...

Or maybe these should also just go in the trash?

Roy

 

[not a hemi]

well we will have to trash can stuff around here give me a price, i will see what i can come up with
thanks nathan

 

[FlyingLow]

What size are they?

 

[JTS VENOM PERFORMANCE]

Sean likes 42lbers, i would think thats what they are

 

[FlyingLow]

What are the stockers?

 

[JTS VENOM PERFORMANCE]

31 -32 lb area

 

[rreinicherr]

Any HP gains on a N/A truck?

THANKS!

 

[Prof]

I will call Sean, there is no indication of size on them...

 

[FlyingLow]

Any HP gains on a N/A truck?

THANKS!

I would say no. They come into play when you go FI and need more fuel then the stock ones can handle.

 

[SilvrSRT10]

I don't know if this is correct but it was the only info I could find.

Siemens Injector: 55lb/550cc Low Impedence, Chrysler part number: 4532586

 

[Ram From Hell]

Any HP gains on a N/A truck?

THANKS!

Add some headers and a custom tune to your setup, and they could help a bit. Add a cam and some better flowing heads on top of that, and they'd probably be worth it.

If you can't move more air through the engine, more fuel won't do you much good.

 

[Prof]

Sean had a the electronics going through a resistor box, which I will provide with the injectors...the new ones did not require it.

Roy

 

[rreinicherr]

Add some headers and a custom tune to your setup, and they could help a bit. Add a cam and some better flowing heads on top of that, and they'd probably be worth it.

If you can't move more air through the engine, more fuel won't do you much good.

THANKS!

 

[Prof]

Input from Sean on the injector questions:

1. Stock injectors are 34 lbs per hour
2. The injectors I am getting rid of are 53 lbs per hour

The 53 lbs injectors could be used in a stock engine that has the VEC II or III.

Without the VEC the engine would run way rich...

Now, who wants the injectors and the resistor box that was used with them?

PM me with your offers...no bids over $150 will be accepted...this is family.

Roy

 

[Texas Yellow Fever]

Input from Sean on the injector questions:

1. Stock injectors are 34 lbs per hour
2. The injectors I am getting rid of are 53 lbs per hour

The 53 lbs injectors could be used in a stock engine that has the VEC II or III.

Without the VEC the engine would run way rich...

Now, who wants the injectors and the resistor box that was used with them?

PM me with your offers...no bids over $150 will be accepted...this is family.

Roy[/QUOTE

PM sent

 

[belgiumbarry]

Input from Sean on the injector questions:

1. Stock injectors are 34 lbs per hour
2. The injectors I am getting rid of are 53 lbs per hour

The 53 lbs injectors could be used in a stock engine that has the VEC II or III.

Without the VEC the engine would run way rich...

Now, who wants the injectors and the resistor box that was used with them?

PM me with your offers...no bids over $150 will be accepted...this is family.

Roy

1 $ ? you pay shipping... :hahaha: :hahaha: :flute: :flute: Oeps, i won't be invited anymore for a weekend arty: ... even with the babes... :girlshit:

 

[Prof]

Roy at $150 I'm in.

I'll send them tomorrow, Steve. Let me know when you get them.

Roy

 

[Prof]

1 $ ? you pay shipping... :hahaha: :hahaha: :flute: :flute: Oeps, i won't be invited anymore for a weekend arty: ... even with the babes... :girlshit:

Oh, contraire mon ami! Your family is always welcome...you will just have to ignore my drooling.

 

[Texas Yellow Fever]

I'll send them tomorrow, Steve. Let me know when you get them.

Roy

PM me your email address, I'll PayPal you, or do would you prefer I wrap the cash up in one of Spousal Unit's bras and mail it?

 

[FlyingLow]

PM sent

First you got me on the oil cap from Marc T, now this. I guess it is payback for the VEC2.