Shifter Wars....The continuance

[DevilDawg3097]

Thanks Bradly I bought the xmetal Gen V off of him. And I must say it is different as almost like an aquired tatse to something....in others words I likey:burnout: Still getting used to it. I also had the B&M and not much different then stock except better 3rd gear shifts also noise IMO was louder with the B&M(also doesn't B&M make the hurst stuff?), but with the s/c now cant hear it anyway:marchmellow: but I believe it was wifey or maybe turtle (too lazy to go back and check) but the advise they gave about the little twist and using the palm (perfect) any other way is almost like trying to force it but with the palm and a little bump :burnout: :burnout: I have only had it in since saturday but so far I give it 7.5 out of 10.need about another week to settle 2 issues. Which maybe nothing. But I would recommend it to others. Will also give a review after the track. :marchmellow:

Oh P.S. Brad those 4 tiny little washers wtf do they go too didnt use them anyway:marchmellow:

EDIT: forgot to mention reverse is like butter unlike the stock shifter and the b&m where you have to slap it like a red headed step child:marchmellow: :rock:

 

[kennygene]

My shifter is stock and 3rd/reverse work smoothly after a very thorough clutch fluid bleed. I couldn't be happier!!

 

[LoveThisTruck]

Glad you like it:rock:

The washers act as shims to adjust the shifter.:dontknow:

If you pull these 4 bolts, that plate comes off and theres 2 springs in there. You can +/- the washers on the springs. I never really messed with it, so I can't tell you exactly how it affects it . There should be 2 washers on each spring now.

Enjoy:burnout:

 

[includemeout]

Thanks Bradly I bought the xmetal Gen V off of him. And I must say it is different as almost like an aquired tatse to something....in others words I likey:burnout: Still getting used to it. I also had the B&M and not much different then stock except better 3rd gear shifts also noise IMO was louder with the B&M(also doesn't B&M make the hurst stuff?), but with the s/c now cant hear it anyway:marchmellow: but I believe it was wifey or maybe turtle (too lazy to go back and check) but the advise they gave about the little twist and using the palm (perfect) any other way is almost like trying to force it but with the palm and a little bump :burnout: :burnout: I have only had it in since saturday but so far I give it 7.5 out of 10.need about another week to settle 2 issues. Which maybe nothing. But I would recommend it to others. Will also give a review after the track. :marchmellow:

Oh P.S. Brad those 4 tiny little washers wtf do they go too didnt use them anyway:marchmellow:

EDIT: forgot to mention reverse is like butter unlike the stock shifter and the b&m where you have to slap it like a red headed step child:marchmellow: :rock:

Another satisfied Palm Pilot :rock: :rock: Love the X Metal shifters :congrats: :congrats: