shims for viper master slave

[LitemUp]

Can someone post up some pics of the shims used for the viper master slave for our trucks?

Does someone know who just sells the shims, or can I get them myself for a hardware store?

 

[HOT RAM]

The shims for the master you can do yourself or use a stack of washers to get 3/8" to 1/2".

For the slave ,Boomer has them.They are a bit expensive.$40 something ,not sure if that is each or for both .:dontknow:

Some will tell you that you don't need the slave shims.YOU MUST USE THE SHIMS ON THE SLAVE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

On the master,it is your choice as it only affects pedal height.

 

[SilvrSRT10]

JMB Justin has them for $65 I think. That includes master & slave spacers & reservoir mounting bracket. Plus shipping.

 

[mauiSRT/10]

Hot Ram is correct.........you gotta use the shims.

patrick

 

[Justanotherdodge]

what's this for?

 

[ZCx]

master is for pedal height. if not used clutch pedal would be up to your knee. slave shim is so the throw out bearin has proper travel for the clutch to release properly

 

[HV SRT]

i bought one of Justins first clutch kits . it did not come with the slave shim. now it won't go into rev. when the truck is running. Justin sent me the shim just haven't got around to install it yet. you need the shim and keep the stock flywheel.

 

[ZCx]

fidanza flywheel is a great addition to the center force clutch & viper throw out bearin set up