side exhaust pics info thread

Tito#14SRT

Tito#14SRT

Full Access Member
Joined
Dec 29, 2009
Messages
1,150
Reaction score
0
Location
Tampa,FL
anyone have pics of there side exhaust installed and specs....
looking for black metal piece where exhaust tips come out of like in the srt10 convertible vipers
 
Last edited:
Nobody has that exact type piece. A couple members made a closeout piece out of steel that looks pretty good.:burnout:
I left mine with the round cutout just to be different but may make a closout piece as well.
I beleive it was SILVERSNAKE out of Dallas that first did this. Check his Avatar
 
The ones that were rounded like a half circle at the front, right?
 
thanks for the thread find Wes!

if you could get the oem ones from the dealer of the viper car wouldnt those work? (metal piece)
 
im at work now on my phone i can take a pic and send later when i get home....but basically im talking about the viper car srt10 that bring side exhaust...they have a metal black piece where exhaust tips exit in front of tire under door..wondering if they sell this piece at the dealer and if it would even work or fit to the shape the panel piece of our trucks are
 
Glad you posted this thread Tito, I'm thinking of exactly what you're looking at doing too. Funny how us Tampa guys think alike. My truck is going into the body shop later this month to fix some stuff from the break-in last weekend so I might try and get the guy to do the holes for me if it's feasible. And I believe this is what you're talking about, look at the pics on the bottom of the page: DODGE Viper III Side Exhaust Tip
 
NSDQ said:
Glad you posted this thread Tito, I'm thinking of exactly what you're looking at doing too. Funny how us Tampa guys think alike. My truck is going into the body shop later this month to fix some stuff from the break-in last weekend so I might try and get the guy to do the holes for me if it's feasible. And I believe this is what you're talking about, look at the pics on the bottom of the page: DODGE Viper III Side Exhaust Tip
Click to expand...

Hey bro...saw the pics and yes the black metal piece is what im talking about but dont think it would work for our body panel on our trucks. it would have to be custom made most likely....but after thinking it thru because I have a CE Truck I will not be doing this mod I dont want to cut into the side of the panel because it will deppreciate in value since I have a special edition:chain:

But if I had a regular non special edition I woould of done this mod a long time ago...:D so in your truck I think you should go for it it looks badass!:rock:
 
Midnight Runner said:
How's the turbos doing man.
Click to expand...

Turbo's.....not so good bro different plans now. After getting back from my honeymoon I still hadnt recieved turbo from Turbonetics they said they were in back order still that they would overnight as soon as they were done building me mine and finishing up the shaft... this and that going around the bush...so I had them refund me the money from turbo. I already had sold my longtube B&B headers to a member on this forum so....basically I have no headers at the moment. the ones I was building I had them with the flow going to the front and coming up on both sides next to valvecover area so right now im reworking those and spinning them 180' degrees to face down and towards the rear like regular headers. should have truck running soon only thing different will be new headers im making without cats same as last time going to B&B catback exhaust with the 90 degree dumps like I had.
Gonna build the motor maybe greg good heads .......:rock:

Engine bay is getting re done as we speak got most of the parts...waiting on a few..and shipping out other pieces here and there from interior as well.

Intake Manifold will be "Polished" w/ the chrome finish look to it...will have blue wires coming from coil packs, valve covers are white with a snakeskin pattern with the blue CE blue stripe viper lettering...Intake will be matching as well as the upper and lower radiator pipe made out of stainless tubing I hope to have done this weekend and ready to ship out monday to match the valvecovers. new coolant jug and washer fluid jug will replace the stock bulky ugly ones and will be powder coated candy blue with a couple other pieces. I will make a thread with pics once I get it done:rock:

give me a call or text whenever bro.....as for PCB wish I could make it this year looks like you guys will be having a blast but dont think I will be able to be there :mad:
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

100 2263
DSC00796
IMAG1072
work and truck 019
Back
Top