Simple Question

[DRamSrt10]

What is the diameter of rotors for both front and rear? I tried use search but cant find any info. I also found some info in google. It is said that the front rotors is 15 inches and rear is 14?? :dontknow: I dont know if it is correct. Any info would be great. Thanks!

 

[DRamSrt10]

anyone? :dontknow:

 

[RedSrt007]

15" fronts 14" rears...

(technically 14.* something fronts and 13.* something rears)

 

[DRamSrt10]

15" fronts 14" rears...

(technically 14.* something fronts and 13.* something rears)

Thanks! Why are the fronts and rears rotor's diameter arent same? :dontknow:

 

[RedSrt007]

Thanks! Why are the fronts and rears rotor's diameter arent same? :dontknow:

Im guessing a few reasons:

#1 Over 70% of your braking is the front
#2 Cost(s) of putting a huge caliper on the rear that is un-needed, and having to upgrade everything that goes with it...master, brake booster, prop valve, etc..
#3 Engineering differences (axle flange size(s), etc..)

-Red

 

[DRamSrt10]

Ahh I see, thanks man! :rock:

 

[DRamSrt10]

Do anyone know what is the code number to order the fronts and rears of rotors in autozone?

 

[mauiSRT/10]

Dram you buying new rotors? There was a thread the other day about drilled and slotted ones from Summit for a very good price.


Here I found the page.


http://store.summitracing.com/egnse...94908110+4294897014+4294871473+115+4294907048

patrick

 

[DRamSrt10]

Yeah I need to buy all 4 new stock rotors. I am thinking to have them drill and slot from Hi Tech Tools.

 

[Prof]

Why buy stock rotors and then have them drilled and slotted?

 

[DRamSrt10]

Why buy stock rotors and then have them drilled and slotted?

I have heard that hitectools can drill and slot the stock rotors for $40 each.
The link to hitectool is http://www.hitectool.com/CrossDrilled.htm

That thread had been posted before.

http://www.vtcoa.com/forums/showthread.php?t=9121&highlight=rotors+custom

 

[mauiSRT/10]

I have heard that hitectools can drill and slot the stock rotors for $40 each.
The link to hitectool is http://www.hitectool.com/CrossDrilled.htm

That thread had been posted before.

http://www.vtcoa.com/forums/showthread.php?t=9121&highlight=rotors+custom

Summit ones will probably end up costing you less though.

patrick

 

[Prof]

Make sure you do a complete analysis, compute mailing costs, time, effort and see if your penny wise decision may not be pound foolish...to say nothing of the possibility that the person who drills and slots your rotors will screw up...

 

[DRamSrt10]

Well...I don't know yet because I don't think if that hitectool are good business anyways. I don't think if I can trust them either. I want to get all 4 drilled and slotted rotors for front and rear but I think maybe I will get the 4 new stock rotors for now.

 

[DRamSrt10]

Make sure you do a complete analysis, compute mailing costs, time, effort and see if your penny wise decision may not be pound foolish...to say nothing of the possibility that the person who drills and slots your rotors will screw up...

Yeah I agreed. But I think I prefer summit racing instead of have someone drill/slot my rotors and then screw up.

 

[mauiSRT/10]

Yeah I agreed. But I think I prefer summit racing instead of have someone drill/slot my rotors and then screw up.

I agree completly!


patrick

 

[DRamSrt10]

I agree completly!


patrick

Yepp! Patrick and Prof, thanks for help!