MNSRT
Full Access Member
I bought another srt-10 and have many extra parts that I will not be needing. Everything is in excellant shape unless otherwise noted and were either something that I had two of or somthing that was just not my taste.
Mopar long tube headers, were on the truck for roughly 1,000 miles. The headers and mid pipes were coated by jet hot and the kit is complete including o2 extenders, heat wrap, bolts, instructions, brackets and new gaskets. The headers do have some scratches in the coating from instalation and removal but nothing that can really be seen once installed. $1600 (bear in mind the coating was $600)
P2120254 by adamthompson3104, on Flickr
- Bedrug, very good shape just needs a good vacuum. It does have two small flat spots where the factory bed cover brackets were installed over the rug. $250
P2110251 by adamthompson3104, on Flickr
- B&M shifter that is wrapped in dynamat, made zero noise when it was installed. The shifter base bolts are not pictured but are included $150
P2120272 by adamthompson3104, on Flickr
- Cover Craft truck cover model C16710TK very good shape just a little dirty around the bottom exterior $150
P2120260 by adamthompson3104, on Flickr
- Mopar RB1 Nav radio with disc and antenna in excellant condition $450
P2120269 by adamthompson3104, on Flickr
- SCT tuner like new and has two more vins open before a reset is needed. Currently has a tune for TB, Headers, CAI, no cats and colder thermostat $300
P2120253 by adamthompson3104, on Flickr
- White Door, tailgate, and license plate bezels. Only a few hundread miles on them and are in perfect condition. Rear handle has been painted for the stripes on the CE $400
P2120250 by adamthompson3104, on Flickr
- Front blue and white JMB grille badge brand new never installed $65
P2120267 by adamthompson3104, on Flickr
- White cal-vu mirrors with only a few hundread miles on them in perfect condition $275
P2120261 by adamthompson3104, on Flickr
- I pod integration kit for the RBK six disc or the RB1 Nav radio part # 82209616AC $150
P2120250 by adamthompson3104, on Flickr
-
Mopar long tube headers, were on the truck for roughly 1,000 miles. The headers and mid pipes were coated by jet hot and the kit is complete including o2 extenders, heat wrap, bolts, instructions, brackets and new gaskets. The headers do have some scratches in the coating from instalation and removal but nothing that can really be seen once installed. $1600 (bear in mind the coating was $600)
P2120254 by adamthompson3104, on Flickr
- Bedrug, very good shape just needs a good vacuum. It does have two small flat spots where the factory bed cover brackets were installed over the rug. $250
P2110251 by adamthompson3104, on Flickr
- B&M shifter that is wrapped in dynamat, made zero noise when it was installed. The shifter base bolts are not pictured but are included $150
P2120272 by adamthompson3104, on Flickr
- Cover Craft truck cover model C16710TK very good shape just a little dirty around the bottom exterior $150
P2120260 by adamthompson3104, on Flickr
- Mopar RB1 Nav radio with disc and antenna in excellant condition $450
P2120269 by adamthompson3104, on Flickr
- SCT tuner like new and has two more vins open before a reset is needed. Currently has a tune for TB, Headers, CAI, no cats and colder thermostat $300
P2120253 by adamthompson3104, on Flickr
- White Door, tailgate, and license plate bezels. Only a few hundread miles on them and are in perfect condition. Rear handle has been painted for the stripes on the CE $400
P2120250 by adamthompson3104, on Flickr
- Front blue and white JMB grille badge brand new never installed $65
P2120267 by adamthompson3104, on Flickr
- White cal-vu mirrors with only a few hundread miles on them in perfect condition $275
P2120261 by adamthompson3104, on Flickr
- I pod integration kit for the RBK six disc or the RB1 Nav radio part # 82209616AC $150
P2120250 by adamthompson3104, on Flickr
-
