SRT10 body parts.

[One_Nasty_SRT]

ok not 100% sure this is the place to post it but best i could find. anyways, last summer i found myself in the dilemma of choosing between an SRT-10 ram and a Cummins. I looked at many SRT-10s but sadly since i live in ny and it would be my only vehicle a 2wd sport truck didnt quite fit the bill so i purchased a nice 05 cummins quad cab short bed in july. as of late my srt-10 passion has flared up again and since i do not have the funds for the actual truck i have been pondering the idea of making my cummins into a clone. Now i can find the hood and front bumper fairly easily but i cant find a good place to get the side skirts and the rear bumper cover:dontknow:. any and all help would be greatly appreciated! also some priceing ideas would be awesome too!. also if theres anyone selling parts le me know im located in ny near rochester and buffalo. any input will be very appreciated thanks!

 

[redice2]

i say save up and buy a real one and i am over here by albany with mine. but it gets garaged all winter

 

[bmxam962]

If you are serious give x2builders a call they will have it all for you.

 

[Yellow venom]

If you are serious give x2builders a call they will have it all for you.

Yes X2 will have everything for sure,even an engine and tranny!:rock:

 

[One_Nasty_SRT]

unfortunatly right now i cant afford one wish i could though! does anyone have a number for this x2builders place? and a location and maybe ideas on prices. and yeah i want need the motor. my rigis about to get the new turbo and will be pushing over 600hp and 1200lbs running somewhere in the 12.5 to 12.2 quaters so im pretty set with that lol

 

[mysrt10]

x2 builders

Their prices may seem steep,but will still be less than dealerships.

 

[mopar-or-no-car]

unfortunatly right now i cant afford one wish i could though! does anyone have a number for this x2builders place? and a location and maybe ideas on prices. and yeah i want need the motor. my rigis about to get the new turbo and will be pushing over 600hp and 1200lbs running somewhere in the 12.5 to 12.2 quaters so im pretty set with that lol

7400 curb weight and 600hp...you'll be lucky to run 13.50s

 

[One_Nasty_SRT]

The guy who built my trans is running the exact same set up (not going to get into details as this isnt a diesel sight) in his 4 door long bed and runs 12.50s consistanly best run being a 12.43 so yeah ill deffinatly break the 13.50s considering im not far off that now with my stock turbo and fueling system

 

[One_Nasty_SRT]

x2 builders

Their prices may seem steep,but will still be less than dealerships.

thanks mysrt10! very helpful

 

[One_Nasty_SRT]

[ame=http://www.youtube.com/watch?v=yFhT4BbxBW8]Firepunk 585hp 1175tq stock injectors and CP3 - YouTube[/ame]

infact thats the dyno pull for the very truck running al,ost the same set up i will be very soon ( didfferent parts) and i will also be doing pump work and injector work

 

[One_Nasty_SRT]

well called x2builders and its 3900 for the side skirts and rear bumper and 1200 for front bumper so needless to say im not paying that much for a look. thanks for the help though guys. ill just save up and be back here looking for the actual truck lol

 

[redice2]

well ever over this way let me know

 

[ViperCLKGTR]

well called x2builders and its 3900 for the side skirts and rear bumper and 1200 for front bumper so needless to say im not paying that much for a look. thanks for the help though guys. ill just save up and be back here looking for the actual truck lol

Sounds kind of on the cheap side, to have my front bumper replaced it was $1500 before paint if I'm not mistaken

 

[mopar-or-no-car]

The guy who built my trans is running the exact same set up (not going to get into details as this isnt a diesel sight) in his 4 door long bed and runs 12.50s consistanly best run being a 12.43 so yeah ill deffinatly break the 13.50s considering im not far off that now with my stock turbo and fueling system

My next door neighbors bosses friend had a.....blaaah blah blah.....so we will be waiting for some vids!!!

 

[phxpoolguy]

well called x2builders and its 3900 for the side skirts and rear bumper and 1200 for front bumper so needless to say im not paying that much for a look. thanks for the help though guys. ill just save up and be back here looking for the actual truck lol

I have the pieces for bed and rear bumper if you manage to find the other parts.

 

[One_Nasty_SRT]

I have the pieces for bed and rear bumper if you manage to find the other parts.

how much ya gotta have forem? and what kinda shape are they in? honestly at this point that kinda cash buys me a whole lotta performance mods so i double ill do it but always worth a look lol

 

[One_Nasty_SRT]

My next door neighbors bosses friend had a.....blaaah blah blah.....so we will be waiting for some vids!!!

dont worry there will be soon as the new turbo goes on and i get to the track.

 

[yellowfever#154]

Do you ever proof read your posts? I'm not sure you have even one without a spelling mistake, let alone the terrible grammar.


Clones are gay by the way, especially a diesel clone WTF?

 

[One_Nasty_SRT]

Do you ever proof read your posts? I'm not sure you have even one without a spelling mistake, let alone the terrible grammar.


Clones are gay by the way, especially a diesel clone WTF?

sorry im very busy with work and dont have time to sit and proof read everything. and dont worry the clone idea is off and obviously this was the wrong site to even bring it up as many of you have your heads up your asses and cant see anything past your viper motors. is it a great motor yes. will i own one yes, but is it the best damn thing to hit the earth hell no. to those of you that helped me thank you very much your time and experience was greatly appreciated to the ones who think your opinion matters it doesnt so take it somewhere else

 

[yellowfever#154]

Bud, a diesel truck would look ridiculous with our body add ons. Glad your not planning on doing it.

Oh wait, I'm supposed to take my opinion elsewhere right, whoops.