Stage 4 Rolling Thunderz Heads, 1.7 Crower Billet Shaft mounted Rockers

[faslane505]

well guys..i think its time for me to get rid of these heads. im gonna go fully forged and spray the piss out of the engine....these heads are currently on the truck now. they are just ported too much for a stock dispacement n/a motor. made 532 rwhp and 511 tq...these heads need a large displacement engine or forced induction to be fully utilized. heads are 2.05int 1.60exh. crower 1.7 billet shaft mounted rockers. i dont have any flow exact flow numbers..only what the builders told me..he said they flowed well over 300cfm..only have about 200 miles on the whole setup. i will need your complete stock heads in exchange.

ive got over $4k in these heads.

will take your heads and $2500 obo. ill pay for all shipping (insured shipment).

once i get your heads it would only be 1-2 business days before yours would be shipped off.

 

[blackviper]

What are you using for valve covers? Spacers?

 

[faslane505]

shit i forgot these come with crower billet spacers...500 bucks for those...included in price...

closer to $5k invested in heads, crower rockers and crower spacers...killer deal for someone!
$2500 firm w/ head exchange

 

[kyle's srt10]

I thought you wanted a Roe Josh :dontknow:

 

[LitemUp]

That's a sweet deal. I wish I had the funds for this. Why didn't you put these up for sale two months ago.

 

[faslane505]

well.....with the heads and mods that i have....with a roe....id be putting down a shit load of power....probably too much for a the stock rotating assembly...with the killer deal that stinker has on oliver rods and JE piston...i can just do a small port job on a pair of stock heads and spray the piss out of it....and only have 2-3k out of my pocket for machine work and assembly (got a guy locally here in the woodlands, tx to pul and put the engine back in for 500 bucks...


oh comp cams push rods included in sale!!!!

 

[faslane505]

wow that was quick....tentatively SOLD!!!

 

[spdrcrj]

congrats on the sale, I can't get anyone to even look at mine

 

[faslane505]

well itook a huge loss on this set up...not that urs is a bad price....i probably sold it way too cheap but...but a member got a great deal and i get to go forged...its tough selling things for close to what you bought things for...i got about 60% of what i had into this setup...but only a limited few could use my setup...had to have forced induction or a stroker...

gl on your sale though pal...

 

[SRT10VENOMOUS]

hey fastlane would you recomend going stage 3 vs that stage 4 with rollingthunderZ??

 

[faslane505]

yes...stage for is just way too much...wish i had to do all over again.

stage 3 and a good cam and you'll be ready to rock brotha!

 

[yellowfever#154]

If for some reason the sale falls through let me know. I will take them.

 

[faslane505]

If for some reason the sale falls through let me know. I will take them.

will do

 

[blackviper]

Hey Josh, check your PM's. I need your shipping address.