Stinker new front springs, sway bars review

[hankthetank]

dude, i'm all over this....just waiting to hear from Tony.

 

[DESRT10]

Was it the Belltech #5555 for the rear?

yes it was, nice kit, I like the frame mount brackets, well thought out design and all parts are made to good tolerances and high quality. We had to mount the bar upside down compared to the instructions, because their way had interference with the diff cover. So now it hangs a bit down as in my picture, but works well. I may look at flipping it at some point, but this would require grinding some on the cover to make clearance, so not sure worth it.

 

[Bone]

yes it was, nice kit, I like the frame mount brackets, well thought out design and all parts are made to good tolerances and high quality. We had to mount the bar upside down compared to the instructions, because their way had interference with the diff cover. So now it hangs a bit down as in my picture, but works well. I may look at flipping it at some point, but this would require grinding some on the cover to make clearance, so not sure worth it.

I have a Mag_hytec cover on my Diff too. That's what worries me. I can't put the Hellwig on because of the exhaust.

 

[JTS VENOM PERFORMANCE]

I'm getting with addco monday , and hopefully we'll get a rear sway bar deal for the qc's:rock:

 

[JTS VENOM PERFORMANCE]

talking with addco guys, they may allready have us something that may work for the quad cabs, willl let yuns know

 

[Slitherbeast]

I

:rock:I finished the stinker's extreme lowering kit c/w caltracs and all poly bushings on the weekend. It was quite an effort ! The truck looks awesome and rides even better! Couldn't be happier. Good , easy to follow instructions. My press was in my shed which was in the backyard. Couldn't get there from outside! There was still 2' of snow blocking the gate so I had to carry each piece through the house to push out the bushings. Seems most parts on these trucks are f$&"en heavy! Just needs an alignment and I am ready for cruisin'. :rock::rock::aetsch::aetsch:

 

[JTS VENOM PERFORMANCE]

:rock:I finished the stinker's extreme lowering kit c/w caltracs and all poly bushings on the weekend. It was quite an effort ! The truck looks awesome and rides even better! Couldn't be happier. Good , easy to follow instructions. My press was in my shed which was in the backyard. Couldn't get there from outside! There was still 2' of snow blocking the gate so I had to carry each piece through the house to push out the bushings. Seems most parts on these trucks are f$&"en heavy! Just needs an alignment and I am ready for cruisin'. :rock::rock::aetsch::aetsch:

rock on huck!!!!!!!!!!

 

[hankthetank]

right on tony....let us know bro.