Stock Exhaust flanges

[sirhc76]

Not sure if Im using the correct terminology the flanges are the portion that the bolts go through to connect to the manifolds? Pipe is flared and the flanges seat the pipe to the manifold? I finally talked my local muffler shop into working on my exhuast by telling them that I wanted a set of "offroad" pipes built. I asked if they could build them from the exhaust manifolds back to the mufflers. He agreed to do it for $150 and then noticed that the flange is an odd shape. So that I dont have to cut the flange off the stock exhaust does anyone have a set of flanges or know where I can get a pair.

Thanks all,

Chris

 

[Wifey]

If you find somewere to get some please let me know, I need a pair also

 

[FerrariTruck]

I hate to give you some bad news but I spent a good amount of time looking
for those flanges and no luck. I tried summit and whole bunch of muffler shops and i came up nothin. The thing with our stock flanges is that the holes are wider apart. What i ended up doing was taking some 2.5in flanges and welded some extra material onto them so there was more material to redrill the holes in. May be boomer has some leftover flanges?

my advice to you, just buy some already made mandrel bent purty stainless steel nmidpipes. If i could do it again i would just have done that...BOlt in...bolt OuT..end of story

 

[sirhc76]

I would imagine someone has a stock set of mids and could cut off the front foot with flanges. This is all I really need and can take that into the shop. I thought about buying the mid section and from what I can tell the are about $400 with $100 shipping. Mids at local shop $150, sims $50, flanges from someone willing to sell them with shipping $75? Im stubborn I know and this is the excuse I needed to get a mig welder.


Chris

 

[Bone]

I'll look for my stockers at the shop tomorrow. I doubt they are still there, nevertheless I'll let you know if I find them.