Sway bar help

[Dkef150hd]

Need some help trying to install a belltech sway bar on a 06 qc.The frame mount kit if you go by the photos on the installation the end links want be straight up or down there at a angle.Does anyone have any photos of the frame mount where they where placed?

 

[SRT2SLOW]

http://www.vtcoa.com/forums/f8/rear-sway-bar-06-qc-32255/

 

[Dkef150hd]

Anyone have photos?

 

[VENOMOUS1 RACING]

Are you lowered?

 

[VENOMOUS1 RACING]

If so you'll need to get some shorter link rods.

 

[SRT2SLOW]

Anyone have photos?

If you Scroll down from that link to find the pics.

 

[Dkef150hd]

I just have belltech shackles that's all.I checked the link with the photos and if I was to put the frame mounts there the dog bone will not be straight up and down .If the dog bones were long it would work there.

 

[SRT2SLOW]

You probably have the sway bar mounted upside down. Flip the sway bar and it will give you more clearance

 

[Dkef150hd]

Tried that when I flip it it hits the diff cover drain plug.I was going to drill new holes under the shock mounts to move it back.

 

[Chewbacca]

Ever figure it out???

 

[Dkef150hd]

No every why i tried it didn't look rite.So I got a used rc sway bar and made my own frame brackets it turn out good.

 

[bmxam962]

No every why i tried it didn't look rite.So I got a used rc sway bar and made my own frame brackets it turn out good.

Do you still have bell tech sway bar?