T-56 measurements needed.

[OSO]

Looking for the distance from the top front of bell housing to the shifter . Thanks if you can help and to hell with you if ya cant

Trying to see if the keslier 6 speed shifter is any further back then the stock 10 trans.
Thanks in advance for the info.

 

[JTS VENOM PERFORMANCE]

cant give you from the bellhousing , but from where the bellhousing bolts to the front of where the shifter bolts is 17 5/8's inches, hope it helps

 

[OSO]

cant give you from the bellhousing , but from where the bellhousing bolts to the front of where the shifter bolts is 17 5/8's inches, hope it helps

Whats the measurements of the bell housing

Might be able to go with that but if you find the rest of it let me know thanks.

 

[JTS VENOM PERFORMANCE]

crap, had to go dig it out, add about 5 1/6

 

[OSO]

crap, had to go dig it out, add about 5 1/6

Thanks , So the stock shifter is just a hair over 22 3/4 if what keisler said is correct that should put their shifter about four inches further back towards the driver, this is good!!

 

[streetwedg]

I have delt with Kesieler before. DONT DO IT, HE IS A THEIF.

 

[OSO]

I have delt with Kesieler before. DONT DO IT, HE IS A THEIF.

Tell us more.

 

[Dom426]

ill have a t56 for you soon

 

[OSO]

ill have a t56 for you soon

Freebie!!!

I wonder what the difference in what they are selling and what comes stock in the 10 are.

 

[bigike]

James when are you going to buy a 10.... Just get it over with..... Low 12's for 16-17 hundred.

By another LX, drop that engine in there, put the 5.7 in the truck and make it a show rig again.

 

[Dom426]

Freebie!!!

I wonder what the difference in what they are selling and what comes stock in the 10 are.

my t56 is fully built everything billet inputs changed ratio in 5th and 6th gear

 

[OSO]

James when are you going to buy a 10.... Just get it over with..... Low 12's for 16-17 hundred.

By another LX, drop that engine in there, put the 5.7 in the truck and make it a show rig again.

Well sure it sounds like a good idea!

my t56 is fully built everything billet inputs changed ratio in 5th and 6th gear

A good freebie

So what are the ratios your running now and how many dollars are you looking to get out of it?

 

[Dom426]

Well sure it sounds like a good idea!



A good freebie

So what are the ratios your running now and how many dollars are you looking to get out of it?

will have to check the ratios i paid 5500 to get it built by g force .....lookin to get 3500