Tach Signal Wire (Help)

[blackviper]

Does anyone know which is the tach signal wire either coming out of the PCM or going into the VEC3?

 

[JTS VENOM PERFORMANCE]

The tach signal can be picked up at the PCM located in the passenger rear of the engine compartment. There are 5 different coil driver circuits that can be used all located in the black PCM connector C1 (the bottom connector). Any one of these can be used...

Pin #1 is circuit K133 dark blue/white for coil control #4

Pin #3 is circuit K18 dark blue/orange for coil control #3

Pin #5 is circuit K134 dark blue/yellow for coil control #5

Pin #7 is circuit K19 dark blue/dark green for coil control #1

Pin #9 is circuit K17 dark blue/tan for coil control #2

 

[blackviper]

Thank you very much sir. You still have me on the list for the new hoods?

 

[JTS VENOM PERFORMANCE]

yup, he should be working on them now as we speak

 

[blackviper]

Thanks again. By the way, which Royal Purple trans fluid did I get from you when I did the extra capacity pan and the shift kit? I need to top of the trans when we fire it up next week.

 

[JTS VENOM PERFORMANCE]

Thanks again. By the way, which Royal Purple trans fluid did I get from you when I did the extra capacity pan and the shift kit? I need to top of the trans when we fire it up next week.

atf max if not mistaken