Test Fit Bumpsteer Kit

[John Stuttle]

Well I received the prototype Bumpsteer Kit and test fit it the other day.

First here is a pic of the original tie rod end and the prototype kit:

http://www.vtcoa.com/forums/attachment.php?attachmentid=8730&stc=1&d=1168475276
http://www.vtcoa.com/forums/attachment.php?attachmentid=8731&stc=1&d=1168475276

Here is a pic showing the extreme angle of the steering arm with the stock tie rod when the truck has been lowered:

http://www.vtcoa.com/forums/attachment.php?attachmentid=8728&stc=1&d=1168475276
http://www.vtcoa.com/forums/attachment.php?attachmentid=8729&stc=1&d=1168475276

Here is a pic of the Bumpsteer kit test installed showing the angle of the steering arm now:

http://www.vtcoa.com/forums/attachment.php?attachmentid=8732&stc=1&d=1168475276

We have made a couple of changes in the final production unit as compared to what you see here.

If you would like more information on the Bumpsteer Kit I have installed please send me a PM or email me at [email protected]

Happy Steering - john

 

[Dominick572]

any kind of guesstimate on how much they are going to cost?

also guessing by the pictures with you using the level. will the final production make that tie rod level with the ground with a drop?

 

[John Stuttle]

any kind of guesstimate on how much they are going to cost?

also guessing by the pictures with you using the level. will the final production make that tie rod level with the ground with a drop?

Sent you a PM - john

 

[JMB Justin]

Good Work John, I'll be getting some from you eventually,
Justin