Think the injectors for our trucks are expensive..

[DevilDawg3097]

$1800. for 6 have to replace as set when 2 or more are bad and they cost more to rebuild, stealership wanted $2745 for 6 reman:marchmellow:

Diesel injector compared to ours in the 10. International 6cyl

International 6cyl

this is the truck 99 International :marchmellow:

 

[DevilDawg3097]

wrong picture for the truck:marchmellow: :marchmellow: :dontknow:

 

[yellowfever#154]

Where are they getting the electronic injectors remaned at? I have looked around and all of the top dog injection shops say that it is not possible to rebuild them. Must buy new injectors, I have come across some that are about $1800 each for new. Its retarded.

 

[perk_1405]

i changed out spark plugs on a natural gas cat 3516 the other day it was colse to 2 grand for 8 of them babies.. they are real easy to change though.

 

[DevilDawg3097]

Where are they getting the electronic injectors remaned at? I have looked around and all of the top dog injection shops say that it is not possible to rebuild them. Must buy new injectors, I have come across some that are about $1800 each for new. Its retarded.

they send them out because I got the new ones from the same place that rebuilds them for International out here:marchmellow: They rebuild everything out here:dontknow: people dont realize its cheaper to buy new sometimes:marchmellow: The same thing happen for a tranny the mount borke the the trans rotated and fuggered up the insides, stealership dont rebuild em but they will sell you a new one, and figures they model I have is 8k. this is where rebuild is cheaper, complete rebuild and pto since its part of the trans:marchmellow: 2400 bucks :marchmellow:

 

[DevilDawg3097]

with 3yr 300k warranty!!!

 

[ctsrt10]

industrail injection in utah

 

[andrew heywood]

How much.....................:argh:

 

[dnz28]

i can get you a set of rebuilts for 800 bucks but you can pay 1800 if you want :marchmellow: if you are getting electrical codes 90% of the time you can just replace te noid on top

 

[dnz28]

I take it that it is a dt466

cat also uses those same injectors some of there engines, i have played with a cummins common rail k38 inector runs 4500 a piece and are the a foot long.

 

[SNAKEGUTS]

Thats a big ass fuel injector!

 

[DevilDawg3097]

i can get you a set of rebuilts for 800 bucks but you can pay 1800 if you want :marchmellow: if you are getting electrical codes 90% of the time you can just replace te noid on top

no 4 of the 6 where shot the electrical parts where fine except 2. No it was an International A530 or something like that, all the rest of my trucks are cummins and 1 cat. now my machines vary from hatz,new holland,komatsu and wirtgen. I use midwest fuel injection for all my fuel related problems gas or diesel, they maybe a little biit higher price then some places but after 14 yrs I have never had to take anything back they have done for me:burnout:

 

[yellowfever#154]

industrail injection in utah

Ill keep that in mind, long way from here but someday may come in useful.

 

[bclark05]

I don't feel so bad about the price of our 10's parts now

 

[bigike]

i changed out spark plugs on a natural gas cat 3516 the other day it was colse to 2 grand for 8 of them babies.. they are real easy to change though.

Perk, post a pick of those cat plugs for everyone. Pretty neat.

Are you running lean burn engines?

 

[lukedovichak]

take a guess at what the new 6.7L dodge injectors are worth

 

[DevilDawg3097]

I can only imagine now since they are hurting for cash:dontknow: 2k?:marchmellow:

 

[yellowfever#154]

Sold a $2200 injector the other day. It has a needle motion sensor in it.

 

[1fast10]

Im gonna upgrade to these injectors in my truck hhahahahahaha

That sucks that theyre so expensive