Throttle Body & SCT Tuner arrived .... Oh Boy!

[JimTeTe]

Can't believe they both showed up at the same time ......

X-Metal T.B. installed tomorrow ...
Tuner setup by Marty (Thanks) referencing last Dyno ....

Gotta get back to the Dyno, and Pray for 505 RWHP thats my immediate goal ...

Let ya's know the new numbers ...... Here's before ....

Paul I gotta get back to the Dyno ....... When ya wanna go?

Jim

 

[TNVIPER]

Congrats...dang, all I want is the tuner..:dontknow:

 

[SRTINCT]

Good news Jim. Let me know if the Milford dyno gets setup. Might run up to Manchester for dyno runs if it isn't too pricey.

 

[JimTeTe]

Good news Jim. Let me know if the Milford dyno gets setup. Might run up to Manchester for dyno runs if it isn't too pricey.

Will do Todd .... Gotta PM Paul, where the hell is he ????????

T.B. on and it looks and runs great, Like all said ... Better throttle response, SOTP fells like ..... Yea, did something ... And BLING .... Nice Lookin.

I'll let you know on the Dyno, like to do it over the next month or so, clutch all broke in as well .... Been an expensive month ...... But ya can't take it with ya ... so what the Hell ....:burnout: :burnout:

Jim

 

[TREKER]

Awesome Jim. Can't wait to see your truck this summer. Good luck with the dyno.

 

[Venom Power]

Good news Jim, I hope the install and tuning went well. Looking forward to learning of your performance improvements.

 

[mmmmtorque]

SCT = +10 peak rwhp

T/B = -10 peak rwhp... at least your mid range and engine bay will look better

 

[Venom Power]

:hmmmm:Ohhhhh.. One cancels out the otherrrr.... Like in maaaath... :stupido2:I get it.....

 

[JimTeTe]

Pics of the T.B.

Guys
Here's a couple pics of the T.B. installed .... Trying to get a Tune from Marty straightened out, and then off to the Dyno ....

I'll due a pull with just the T.B. (base was 466hp) then the tune ... I'll Keep all posted ...

 

[TNVIPER]

While I have no dyno proof I was amazed I how much more responsive my truck felt after installing the Roe TB...:dontknow: :rock:

 

[JimTeTe]

While I have no dyno proof I was amazed I how much more responsive my truck felt after installing the Roe TB...:dontknow: :rock:

Thanks for the feedback ....... I have the perfect opportunity to check what the real deal is on the T.B. ....... The more I drive it the more SOTP it feels different ......... So off to the Dyno before I flash the truck with any tune. Because my baseline is right before T.B. was installed, we should get a good result at the same Dyno as well...... Very interesting ......:questionmark:

Jim

 

[sleeper]

Cool! I hope you gain HP. If you do I'm going to buy one.

 

[mauiSRT/10]

....... I have the perfect opportunity to check what the real deal is on the T.B. ....... The more I drive it the more SOTP it feels different ........ ......:questionmark:

Jim

Thats because it is different. I love mine............great mod IMO!! Flash will be even more power, especially since you have headers and the stock cats are gone.

patrick

 

[Yellow venom]

Is there any differance other then price in all the diferent TB's?

 

[JimTeTe]

Thats because it is different. I love mine............great mod IMO!! Flash will be even more power, especially since you have headers and the stock cats are gone.

patrick

Thanks Patrick ...

I get 3 pulls so I figured, first, w/T.B. maybe 2, then flash it, and see what we get overall ........ Very curious ...:dontknow: I gotta get the super tune from Marty first, then coordinate the Dyno with Paul (ctsrt10). I'll let ya know how we make out.

Yellow Venom .... I have heard good things about the Roe and X-metal T.B., I like the X-metal so far ....

Jim

 

[Yellow venom]

Thanks Patrick ...

I get 3 pulls so I figured, first, w/T.B. maybe 2, then flash it, and see what we get overall ........ Very curious ...:dontknow: I gotta get the super tune from Marty first, then coordinate the Dyno with Paul (ctsrt10). I'll let ya know how we make out.

Yellow Venom .... I have heard good things about the Roe and X-metal T.B., I like the X-metal so far ....

Jim

OK,interesting to see how your dyno goes.

 

[nycstev]

I will probably head up to Milford Next week for a nother Dyno Pull. This time with AF ratio, Have to send this to Roe to get retune an smaller pulley

 

[JimTeTe]

I will probably head up to Milford Next week for a nother Dyno Pull. This time with AF ratio, Have to send this to Roe to get retune an smaller pulley

Steve
If I get the Tune by then I'll meet ya there. Gotta find out how much $ if not 4 or 5 trucks going. Unless we could find a few more. Think it's like 125 or so ....?

Jim