John! How could you think that I would ever infer such a droll concept...
You shock my modesty!
You shock my modesty!
Prof said:John! How could you think that I would ever infer such a droll concept...
You shock my modesty!
Not being up on all the urban slang. "Just parkay", is that a good thing or an insult?:dontknow: From what I've obtained on the internet, it appears your telling me to go take a flying leap. This is not a good thing.Venom Power said:The mute switch on the shifter is just parkay.. I should'a thought of that. And where did you find the lightbar with reverse lights?
TNVIPER said:hey Jake....this interests me...the insulation on mine looks dirty & frayed....where are those pictures you spoke of...?
Black1 said:It's easy to take off... It's just 4 pop-pins. :rock: Here's Mutt's truck with the insulation removed (and the switch for the hood light).
It looks SOOOOO much better w/ that crap off of there. :rock:
As requested:TNVIPER said:Ok....the picture convinced me....the insulation dies...that does look much better........funny you should mention the hood light switch....I was just looking under the hood 20 minutes ago and thought "that hood light needs a switch"....my hood almost stays up more than down....everybody always asks the same question.."can I see under the hood?"... .........now for the switch...tell me about it if you dont care?..
Also in the picture, i painted the yellow caps silver (before the sneaky pete billet covers)Black1 said:It's easy to take off... It's just 4 pop-pins. :rock: Here's Mutt's truck with the insulation removed (and the switch for the hood light).
It looks SOOOOO much better w/ that crap off of there. :rock:
where can i get thoughs little items? i like the viper decals and the ss handlesSilvrSRT10 said:Here are a few more inexpensive and easy to do items.
Stainless handle covers
View attachment 19140
Viper caliper decals
View attachment 19141
Clear corner headlights
View attachment 19142
Viper fangs on Valentine 1 mount
View attachment 19143
EZLift tailgate torsion bar. You can lift the tailgate with two fingers.
View attachment 19144
Stainless doorsill guards
View attachment 19145
LED tail lights and under tailgate light bar
View attachment 19146
with reverse
View attachment 19148
X Metal GenX shifter (if your a 6 speed). Not so cheap but an easy install.
The wire running up the front of the shifter is a micro switch to mute the V1 without ever having to take my hand off the shifter.
View attachment 19147
JMB's Radiator topper
View attachment 19151
Three pod "A" Pillar with Raptor along side
View attachment 19152
As most of you know by now. It's an addiction. I can't help myself. If there's a cure. I don't want it.
I got the viper decals here. Just go under "Brake Caliper Decals" and look for Viper.Hucksrt10 said:where can i get thoughs little items? i like the viper decals and the ss handles
SilvrSRT10 said:Always happy to share.
http://www.countryjoycrafts.com/350Z/valentinemount.htm
We need the 3/4 inch one to fit our mirror stems. I even put a fanged viper emblem on the front side of the mount for all to see through the windshield. I'll have to get pics tomorrow. Oh yeah, this is a quality piece. Made from aluminum not plastic.
They also make one for you Escort owners. I'll be ordering another one for my other vehicle to mount my Escort 8500.ghosritr said:Just got mine. Took less than 5 mins. to install. This is one sweeeeeeeeeeeet piece. Thats what makes this forum so great; the sharing of ideas. Thanks!
WAZZSUP said:Take your wiper blades off, stop by the hardware store and pickup the bottom leg caps from bar stools or kitchen stools ( Black ). They fit exact over the wiper cogs. This protects the gears as well as gives you a finished look. It cleans up the windshield area. I don't run wipers at all, just rainex and watch the weather channel. You can always put the blades in the back for those unexpected thunder clouds.
Disclaimer: I am not telling you to do this, nor do I think a State Police Officer will always give you a pass on this infraction....but for the 3.00 you'll have invested in getting the 2 covers....it's a great mod.
Wanna save 50% on this mod...the bar stool leg covers come in 4 packs....split the cost with another member
SilvrSRT10 said:Hey Burk, How close to Shaw AFB are you. Use to go there and work on their overhead doors in all their hangers. Nothing like walking into a dark hanger and once your eye's adjust to the light, turning around and looking up the ass end of a F4 Phantom. Kind of makes things pucker a little. Here are some pics of how I've got my detector mounted and room for extra gauges and Raptor shift light. And to help with the sub, pack it with insulation.
View attachment 19099 View attachment 19100 View attachment 19101
The center gauge is an Autometer DPIC. It's a performance computer. Here's everything it does:BigDave1970 said:What are the top 2 gauges for in your gauge pod, and where can i get them?