tires

[Ironhead]

drag radials or drag slicks for just the track????since i plan to swap out when i hit any tracks ,,,witch one is better ??

 

[eddie102870]

youll need drag radials unles you plan on swapping the rear end

 

[oldguysrt10]

drag radials or drag slicks for just the track????since i plan to swap out when i hit any tracks ,,,witch one is better ??

If you opt for the M&H Drag Radials on AE rims that seem to be the preferred selection, I have a set about 90 miles East of Houston I'd sell for $500 but pickup only/no shipping. I bought them last year from MoparRacing I think for $600 (He may can confirm...was either $600 or $660). He advertised them as 80% of the tread left, and rims in new condition. I'd previously had a set and couldn't tell that tread was down on these at all. I've been to the track one time with the/made 3 passes. Just let me know if you're interested. Tires still look great/rims look new.

oldguy

 

[Ironhead]

i already have a set of rims just need rubber ,,,were you at winnie area??

 

[Trainman]

You will need a 17 X10 wheel for the M&H 390-40-17 Drag Radial , as it is the only one worthwhile with the 6 speed trucks. The Nitto 305-45-18 isn't much better than a street tire and all the other drag radials are too short.

 

[moparracing]

If you opt for the M&H Drag Radials on AE rims that seem to be the preferred selection, I have a set about 90 miles East of Houston I'd sell for $500 but pickup only/no shipping. I bought them last year from MoparRacing I think for $600 (He may can confirm...was either $600 or $660). He advertised them as 80% of the tread left, and rims in new condition. I'd previously had a set and couldn't tell that tread was down on these at all. I've been to the track one time with the/made 3 passes. Just let me know if you're interested. Tires still look great/rims look new.

oldguy

wasn't me ??:dontknow:

 

[TNVIPER]

wasn't me ??:dontknow:

Dont try and deny it now....

 

[moparracing]

Dont try and deny it now....

i thought this was the "don't ask, don't tell" thread..... why you in here ?

 

[TNVIPER]

i thought this was the "don't ask, don't tell" thread..... why you in here ?

I think "wasn't me ??" took care of the "dont tell"...:dontknow:

 

[FATJACK]

You will need a 17 X10 wheel for the M&H 390-40-17 Drag Radial , as it is the only one worthwhile with the 6 speed trucks. The Nitto 305-45-18 isn't much better than a street tire and all the other drag radials are too short.

Yep, Yep..

 

[oldguysrt10]

wasn't me ??:dontknow:

Sorry, I'll look back through emails and confirm who it was.

Thanks,
oldguy

 

[Ironhead]

i already have a set of rims just need rubber ,,,were you at winnie area??

Winnie ,Texas that is

 

[oldguysrt10]

Winnie ,Texas that is

Nope, in Orange but no interst in selling separately.

I'll just hang onto them until cool weather and make a few more passes.

oldguy

 

[JTS VENOM PERFORMANCE]

If ya'll find anything mickey thompson makes that you are interested in , I can probably get a pretty good deal on them , DR's and slicks.

 

[Ironhead]

Nope, in Orange but no interst in selling separately.

I'll just hang onto them until cool weather and make a few more passes.

oldguy

i know orange well ,golden triangle baby, i graduated from Hamshire Fannet-High ,GO LONGHORNS,,i used to work for a company there in orange called Cloeren it is right down the the other side of I-10 from the Flying-j truck stop