Marc T
Full Access Member
Stingray said:
Thanks!!
Transmission Fluid
- Thread starter RedSrt007
- Start date
Thanks!!
Marc T
Full Access Member
Just curious if there would be a way to clean out the gunky fluid put in by DC before installing the new ATF. Seems that if it's really thick your gonna have alot of residual left in the tranny!!
RedSrt007
Active Member
Marc T said:
only a couple ways, 1 way it to take the tranny down to a tranny shop, they will open it up and clean it out...or the easy way is to just drain the fluid as long as you can, then after a few Mobil 1 ATF oil changes, it will clean itself....
-Red
So, just outta curiousity, since we kinda settled the issue of what to use in the tranny, is there a gear oil for the rearend that is better than what comes with the truck?..I know some have changed gears, and stuff. did you use any special oil when reassembling? Sorry bout being off topic, but I am planning to do the trans oil change, and figured since I was under there....
RedSrt007
Active Member
Riff62 said:
From what I have heard, the rear-end gear oil is fine, just use the mopar suff w/ the friction modifier; unless someone has looked further into the diff fluids.
-Red
i used mobil one synthetic gear oil
FerrariTruck
Full Access Member
getting ready to drain both my diff and 6sp trans.
Are we still putting in syn atf for the trans?
Are we still putting in syn atf for the trans?
FATJACK
Full Access Member
Yep. by far the best way to go. A noticeable difference especially in cold weather.
Support Us
Become A Supporting Member Today!
