Truck leaking from EVERYWHERE....HELP!!

[BOOMER]

Flying Low is pretty much saying how we all are -- I felt as though you were calling on us to help you understand wtf was happening. Your not alone bro very few here are SRT-10 wizards and we are pretty much in the same boat from time to time -- relax, all will be right with the world, ummm - we'll at least the SRT-10 world cause the real world is f*****d up

Sounds like your on the road to recovery -- Boomer rules!

dude i LOVE your Katie Couric interview with the Marine sniper!!!
makes me proud to be a Marine!!!!! aaaaaaaaaaaaaUUUUUUuHAAAA!

 

[Prof]

Boomer Rocks...but just where is Indiana?

 

[BOOMER]

Boomer Rocks...but just where is Indiana?

it keeps kentucky from sliding off, becuase indiana sucks

 

[Wifey]

I still havent seen the oil filter, but then again, I cant fit under my truck..

They do make jacks for that there problem .............. :dontknow:

My filter is black and says MOPAR on it

 

[sapientiam]

it keeps kentucky from sliding off, becuase indiana sucks

Did somebody say Kentucky?

You should move your shop down here to the bluegrass state. We know all about horsepower, we are the horse capital of the world after all.

Michael

 

[Black1]

Does the Novi SC have oil lines running to it? You might want to check those as well. That is what could be spraying the front of the truck..... :dontknow:

 

[BOOMER]

Did somebody say Kentucky?

You should move your shop down here to the bluegrass state. We know all about horsepower, we are the horse capital of the world after all.

Michael

we are 300 yards from KY.....................if we are down wind from KY our brain cells try to incest eachother

 

[bikertat]

Does the Novi SC have oil lines running to it? You might want to check those as well. That is what could be spraying the front of the truck..... :dontknow:

Hey Black......I'm taking it to Boomer on Tues. I am terrible at these mechanical things . Poor Boomer tries to walk me through it and I'm just excited to be able to find the motor .......also about your truck.....man, I would love to buy it, but this J/off at work keeps messing around about getting the money for my bike.....can't do much til I sell it.....thanks for the advice tho.....bikertat:burnout:

 

[Black1]

Hey Black......I'm taking it to Boomer on Tues. I am terrible at these mechanical things . Poor Boomer tries to walk me through it and I'm just excited to be able to find the motor .......also about your truck.....man, I would love to buy it, but this J/off at work keeps messing around about getting the money for my bike.....can't do much til I sell it.....thanks for the advice tho.....bikertat:burnout:

No Problem TAT! I got my eye on a 36' Scarab Express Fishing boat... I think I might have to keep it. The old SRT would be HURTIN' if I didn't! LOL :2in1:

 

[GriMacE 06QuadSRT10]

dude i LOVE your Katie Couric interview with the Marine sniper!!!
makes me proud to be a Marine!!!!! aaaaaaaaaaaaaUUUUUUuHAAAA!

Hey Gary -- YOU SHOULD BE PROUD BROTHER - You guys are saving my sorry ole ass when I can't - You all have my undying appreciation!!!!!

As for Couric -- what a stupid question... but righteous answer

Your rule bro

ps - got your email re the PCM for my beast but trying to save the funds up

 

[bikertat]

Just alittle reminder that I am heading to Boomer's shop tomorrow morning (around 9-10am), if anyone is in the area. Would be nice while he is working on my truck to meet a few of you. :burnout: bikertat

 

[Viper Spray]

Does the Novi SC have oil lines running to it? You might want to check those as well. That is what could be spraying the front of the truck..... :dontknow:

Yes , you have to tap into the oil pan to run the oil line for the NOVI ,at least I had to on my Viper, that line could be leaking also. I ran breathers from my valve covers to a catch can on my Viper in order to cut back pressure and keep oil from blowing out.

http://www.vtcoa.com/forums/attachment.php?attachmentid=4211&d=1158389634

 

[Prof]

Just alittle reminder that I am heading to Boomer's shop tomorrow morning (around 9-10am), if anyone is in the area. Would be nice while he is working on my truck to meet a few of you. :burnout: bikertat

Timing is not quite right...I will be living in Wadsworth, IL and using Boomer too. Had the timing been better we could have formed a convoy so you would have wheels while the "the Artist" did his magic...

I will contact you as soon as my ride gets off the carrier!

Roy

 

[Black1]

Yes , you have to tap into the oil pan to run the oil line for the NOVI ,at least I had to on my Viper, that line could be leaking also. I ran breathers from my valve covers to a catch can on my Viper in order to cut back pressure and keep oil from blowing out.

http://www.vtcoa.com/forums/attachment.php?attachmentid=4211&d=1158389634

I have heard that breathers are a good idea on blown motors. Thanks for the confirmation on the oil line. I guess we'll have to wait and see what the culprit is...

 

[bikertat]

I have heard that breathers are a good idea on blown motors. Thanks for the confirmation on the oil line. I guess we'll have to wait and see what the culprit is...

Well the culprit was.......a piece from the accusump failed and it was blowing oil everywhere......plus I do have a small leak coming from the tranny. Nothing major, but this will be fixed in March '07, plus me and Boomer have alot more instore for my truck then. But all is well with my truck now....3 1/2 hrs home and no leaks :rock: . I got about 13.6 mpg there and back (average 75mph)....truck temp about 180 and oil temp 180....everything was great.
I did however stop by the Dodge stealership in Terre Haute, IN. to have them check the gear oil (tranny). First of all, it looked like the whole Beverly Hillbillies crew was working there......anyway.... a young kid comes out and looks at my truck----I have no badges so I could tell he was wondering what it was......I asked him if they had time to check the gear oil in the tranny for me and he said in a very smart ass way, "It only takes a sec, pull the dipstick and check." So I said (in a very smart ass way), "Hey dumbass, there is no dipstick." So I proceded to get in my truck and left them a nice little present in their car lot:burnout: .
Long story short---truck is fixed for now.....a BIG THANK YOU BOOMER. :rock: . Don't forget what you promised next time I'm down there:burnout: ....
Just wanted to let everyone know that the truck is fixed and has a fresh oil change.....and Boomer---thanks again bro....bikertat

 

[BOOMER]

Well the culprit was.......a piece from the accusump failed and it was blowing oil everywhere......plus I do have a small leak coming from the tranny. Nothing major, but this will be fixed in March '07, plus me and Boomer have alot more instore for my truck then. But all is well with my truck now....3 1/2 hrs home and no leaks :rock: . I got about 13.6 mpg there and back (average 75mph)....truck temp about 180 and oil temp 180....everything was great.
I did however stop by the Dodge stealership in Terre Haute, IN. to have them check the gear oil (tranny). First of all, it looked like the whole Beverly Hillbillies crew was working there......anyway.... a young kid comes out and looks at my truck----I have no badges so I could tell he was wondering what it was......I asked him if they had time to check the gear oil in the tranny for me and he said in a very smart ass way, "It only takes a sec, pull the dipstick and check." So I said (in a very smart ass way), "Hey dumbass, there is no dipstick." So I proceded to get in my truck and left them a nice little present in their car lot:burnout: .
Long story short---truck is fixed for now.....a BIG THANK YOU BOOMER. :rock: . Don't forget what you promised next time I'm down there:burnout: ....
Just wanted to let everyone know that the truck is fixed and has a fresh oil change.....and Boomer---thanks again bro....bikertat

no problem, it figures a 4 dollar pressure switch was the culprit!
welp, at least you got a fresh oil change ala freebie, and we got to brainstorm for the future manifistation we are going to build for ya. plus when you come down again, we will go for a ride in the new 4 digit horsepower X-Metal truck.

 

[sleeper]

Wow four digits. Sounds bad ass!

 

[bikertat]

........ plus when you come down again, we will go for a ride in the new 4 digit horsepower X-Metal truck.

Okay now I can't sleep.....probably won't be able to sleep til March now.....thanks alot

 

[Black1]

Okay now I can't sleep.....probably won't be able to sleep til March now.....thanks alot

Hehehehe.... I'm DROOOLING TOO!!! Glad you got everything worked out. It figures it was a $4 part... Welcome to my life!

 

[silversrt]

no problem, it figures a 4 dollar pressure switch was the culprit!
welp, at least you got a fresh oil change ala freebie, and we got to brainstorm for the future manifistation we are going to build for ya. plus when you come down again, we will go for a ride in the new 4 digit horsepower X-Metal truck.

I take it that there are no decimal places in that 4 digit number:dontknow: lol