Turbo Header progress on the silver truck
- Thread starter FSTJACK
- Start date
FSTJACK
Full Access Member
Nowwhat
Full Access Member
hey what year is that truck....an '04 right.....how many miles did you put on it in lets say the last....umm year and a half....?......bwwwhahahahaha...
FSTJACK
Full Access Member
Nowwhat said:
It is an 04
Miles in the last 2.5 years = maybe 1000, all on the trailer.
Nowwhat
Full Access Member
FSTJACK said:
put her back to stock then...gonna be a collector's item....
send me the turbos and such....
mmmmtorque
Full Access Member
Nice pics !! Starting to resemble a truck again 
I think you need a larger intercooler
I think you need a larger intercooler
Nowwhat
Full Access Member
man you need a test driver........I will do it for....ummm.....free....
RedRamRules
Full Access Member
Man those headers are bad-ass looking, nice job! BTW Jack, are you planning to powdercoat the valve covers, they look a little dirty .
The exhausts ports on the block in the first pic, can you hone or increase the size? Wondering if they are honed from the factory or not. Thanks.
.The exhausts ports on the block in the first pic, can you hone or increase the size? Wondering if they are honed from the factory or not. Thanks.
ViperTruck2933
Full Access Member
Looks awesome Jack. Coming along very nicely.:rock:
DRamSrt10
Full Access Member
Wow! The headers are looking awesome! Nice pics!!
That looks like a 60-1 turbo, I'm assuming you're gonna run duals. What RPM are you expecting full boost at? That thing is gonna be bitchen!!!
FSTJACK
Full Access Member
Nowwhat said:
After it is done you can buy it and put it back to stock..........I have saved all the stock parts..................
Originally Posted by Nowwhat
man you need a test driver........I will do it for....ummm.....free....
You will need an NHRA 4B short wheelbase license.............................
Originally Posted by mmmmtorque
Nice pics !! Starting to resemble a truck again
I think you need a larger intercooler
Charles, sorry but that is the biggest one we could fit in the truck.............
Originally Posted by RedRamRules
Man those headers are bad-ass looking, nice job! BTW Jack, are you planning to powdercoat the valve covers, they look a little dirty
.The exhausts ports on the block in the first pic, can you hone or increase the size? Wondering if they are honed from the factory or not. Thanks.
The motor that is in the truck is just a mock up, for build purposes.
Those valve covers will not be on the first finished motor........There is another bigger/better motor in the works already.
We are running ported Striker heads not the ones in the pics.
FSTJACK
Full Access Member
HDVIPER said:
The turbo's are going to be super 66's. Full boost will be before 4000 RPMs.
Thanks, it should be a lot of fun............:rock:
Ram From Hell
Full Access Member
FSTJACK said:
I figured as much!:rock: I knew there was no way in hell you'd stay with a factory casting. The Striker's are just too sweet.
Those photos are definitely worth a sh!t-eatin' grin. The intake is just completely sick. It looks like a perfect fit!
FaSt ReD SrT10
Full Access Member
- Joined
- May 19, 2006
- Messages
- 192
- Reaction score
- 0
WoW!!!! Thats a Gen 2 engine correct? I say that because of the dual throttle bodies and the valve covers.
not bad rookie!lolol
FSTJACK
Full Access Member
Stinker said:
That's me.........................
Begood
Full Access Member
Damn Jack, you are gettin REAL serious!:rock:
I am going to have to see that truck run when you get it done.
Bill.
I am going to have to see that truck run when you get it done.
Bill.
I can see it now, Jack makes his first pass and kills Mikes time.
Mike heads back to the pit and looks at his motor
and is over heard saying.....
"Nowwhat"
Mike heads back to the pit and looks at his motor
and is over heard saying.....
"Nowwhat"
Support Us
Become A Supporting Member Today!
