Nowwhat said:
It has headers Mike. You wouldn't want it.
Turbo Header progress on the silver truck
- Thread starter FSTJACK
- Start date
It has headers Mike. You wouldn't want it.
Voodoo
Full Access Member
- Joined
- May 21, 2006
- Messages
- 1,417
- Reaction score
- 1
man jack, that intake turned out nice!
Texas Yellow Fever
Full Access Member
Jack, you should be very proud, that thing is looking great!!!
KRAZYSRT10
Full Access Member
- Joined
- Sep 2, 2006
- Messages
- 9,647
- Reaction score
- 0
MYuGiOh Motorsports said:
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :star:
Nowwhat
Full Access Member
MYuGiOh Motorsports said:
I'll be overheard saying, "hey Jack I will overpay and give you $42k for the beast"
Voodoo
Full Access Member
- Joined
- May 21, 2006
- Messages
- 1,417
- Reaction score
- 1
hahaha, man talk about a low blowNowwhat said:I'll be overheard saying, "hey Jack I will overpay and give you $42k for the beast"
Rice Eater
Full Access Member
them look sweet! getting there!
holy trubos fast jack.
SRT-10 OF SWEDEN
Full Access Member
That is going to bee one amassing truck....Very nice work ....:rock: :rock:
Stefan....
Stefan....
FSTJACK
Full Access Member
FaSt ReD SrT10 said:
The engine that is in the truck currently is a "MOCK UP". It is just there to build other components around it. The block has holes in the side where a rod broke and came through.
There will be a GEN 3 motor in there when finished.
The valve covers are GEN 2 but are there just for mock up.
The intake manifold is a "one off" fabricated by Hogan Racing Manifolds.
The reason for the 2 throttle bodies/air doors is the size.
Each air door a is 90MM Accufab custom which is 3.543 inches inside diameter.
The stock air door size on a GEN 2 is 65MM which is 2.559 inches, inside diameter.
When it is finished there will be very few stock parts under the hood.
FSTJACK
Full Access Member
Nowwhat said:I'll be overheard saying, "hey Jack I will overpay and give you $42k for the beast"
What a deal, I might have to think about that...................I thought about it.
Thanks for the offer, but it does have headers and I know how you feel about headers.
I could not ask you to invalidate your soverign thinking regarding useless performance enhancers.
I would not want you to predicate your purchase on a tenant that would voilate your value system.
I have far too much respect for you, to be a contributor to a catastrophic disruption of the empyrean balance of your psyche.
ILtemprd
Full Access Member
- Joined
- May 18, 2006
- Messages
- 3,019
- Reaction score
- 0
looks great jack..:rock: :burnout:
FSTJACK said:
Damn Jack, had Django been coaching you.
Sorry
, I got so busy picking on Mike that I forgot to say that the pictures are awesome.
Nowwhat
Full Access Member
FSTJACK said:
is there a wing....?????
Hope you are thinking about getting it to different parts of the country...what NHRA class or classes do you think it will fit?
Roy
Roy
Prof said:
Stock.
FSTJACK
Full Access Member
K-80-123 said:
The turbo headers and exhaust, and intercooler set up and plumbing is being done by one of our vendors.
Richard, of Richards Performance Muffler in Vista, CA.
Originally Posted by Prof
Hope you are thinking about getting it to different parts of the country...what NHRA class or classes do you think it will fit?
Roy
It will actually be a legal Super Comp vehicle. I doubt that I will run it in that calss.
Pacific Street Car (PSCA) has an 8.60 ET index class that prohibits electronics; ie throttle stops, delay boxes ect. I will probably run it there as a index bracket vehicle.
Originally Posted by Nowwhat
is there a wing....?????
If I told, you would have to be delt with harshly..............
There might be a wing, or there might not be a wing.............:dontknow:
It might be a stock wing, or it might be a fabricated wing..............:idea:
RedSrt007
Active Member
I say stock wing to show-off the SRT-10
Support Us
Become A Supporting Member Today!
