Turtle Wax Liduid Clay Bar ICE!!!

[BurntRubber]

stuff is great, washed down with ArmourAll car wash, used the liquid clay bar, hosed the car off and dried with some microfibers. Car looks great. It took of grime and dirt I could never get off.

next week I am going to rewash, liquid clay, wash, Meguirs NXT wax it! she should be pretty for the GTG.:rock:

on a side note, this car is ridiculously easy to do donuts in:burnout:

 

[wyoramsrt-10]

No pics?

Can't wait to see your car. I have never seen a GTS up close.:rock:

 

[mauiSRT/10]

Pics of car and Liquid clay bar ice?

patrick

 

[BurntRubber]

No pics?

Can't wait to see your car. I have never seen a GTS up close.:rock:

if you just want to see it up close thats lame

 

[BurntRubber]

Pics of car and Liquid clay bar ice?

patrick

Once I get the wax on pics will be coming!
http://www.turtlewax.com/main.taf?p=2,1,1,4

it doesn't dicolor the trim either, so yu can be a little sloppy!

 

[Dave T(BADVENM)]

Once I get the wax on pics will be coming!
http://www.turtlewax.com/main.taf?p=2,1,1,4

it doesn't dicolor the trim either, so yu can be a little sloppy!

What, nobody is gonna comment (other than me) on the "be a little sloppy" remark? :dontknow: :elefant:

 

[VIPR PWR]

I use the liquid clay bar and it works great ---but it must be waxed asap to get a protective wax coating back on it -----Don't be sloppy hahaha

 

[BurntRubber]

What, nobody is gonna comment (other than me) on the "be a little sloppy" remark? :dontknow: :elefant:

I guess no one found it funny

I have liquid clay all over my garage floor!

 

[Black1]

I used the Turtle Wax ICE stuff... and it SUCKED! .... I trust you tho, and might give the "liquid clay bar" a chance. :dontknow:

 

[sirhc76]

Use the Ice liquid stuff for your plastic trim if you have any, handles, mirror and the likes. I do this prior to my wash and it keeps the wax off the trim. Another trick that I recently learned is use peanut oil to get any residual wax off of trim, works like a charm. I started using tropicare products and well Im impressed with it enough to continue. I had to break out the porter cable after I got the GTS and tear into it with a yellow pad and some medium cut swirl remover. Take a look at these pics under halogen. Center of each pic is before right and left are after.

 

[BurntRubber]

I used the Turtle Wax ICE stuff... and it SUCKED! .... I trust you tho, and might give the "liquid clay bar" a chance. :dontknow:

I won't use the wax because I have heard the same thing. I thisnk the soap is only useful when you have a good wax base on your car.

 

[Gaboon]

I used that stuff as well and it really works well.

 

[newmexicoviper]

Where did you get the liquid clay bar @??

 

[davo19]

i may have to try that

 

[BurntRubber]

Where did you get the liquid clay bar @??

Target, $16, should do a QC at least 2-3x

try when you come out!

 

[newmexicoviper]

Target, $16, should do a QC at least 2-3x

try when you come out!

Right on thanks buddy:rock:

 

[BurntRubber]

Right on thanks buddy:rock:

I figured on Saturday we would clean em all up. If you use the liquid clay, we have to wax it right after. Just pull it up into my garage!

I used some meguiars NXT liquid wax on the Viper. Looks show room new! I thing in april I will strip it down reclay, and put on a heavier wax. You could just try to clay the front and get the road grime off!!!

 

[newmexicoviper]

I figured on Saturday we would clean em all up. If you use the liquid clay, we have to wax it right after. Just pull it up into my garage!

I used some meguiars NXT liquid wax on the Viper. Looks show room new! I thing in april I will strip it down reclay, and put on a heavier wax. You could just try to clay the front and get the road grime off!!!

Right on its pretty clean know but no telling what it will be like after i get there, thanks for the garage offer.

 

[lukedovichak]

is the clay bar an actual bar?? or is it a liquid?

i have tried a wax once on my street bike. and all it did was make is slippery eveyrwhere. and didnt do much for the bike but it was all plastic. i wanna make it shiny and clean as hell, whats the best way?