underhood liner

[SANCHOBA]

i used my wife's fabric paints.

 

[VIPR PWR]

I got this on The Viper Store.com. They have some awsome stuff for our truck but they ain't cheap. You going to the Panama GTG?:burnout: :burnout: :burnout:

I am going to try to get there, business schedule has to work out for the decision to be made ,if it happens it will be at the last minute and probaly friday and sat only... I hate working for myself lol.

 

[VIPR PWR]

Some strategically placed double stick tape :dontknow:

That was one of my thoughts,,, or drilling and putting a couple of those black push in clips... I don't like the idea of drilling

 

[ZCx]

That was one of my thoughts,,, or drilling and putting a couple of those black push in clips... I don't like the idea of drilling

that was my brain fart. :toilet:

brand new drill bit, set the drill, lined it all up & friggin bingo 2 or 3 little zits in the hood:elefant: :aetsch:

 

[JRSVIPR]

You could always go with one of these.
http://www.theviperstore.com/RAM-SRT10_Products_Exterior_Appearance_Hood.htm

 

[ZCx]

anyone know how much a new Viper liner is???????

 

[wesalbert]

that was my brain fart. :toilet:

brand new drill bit, set the drill, lined it all up & friggin bingo 2 or 3 little zits in the hood:elefant: :aetsch:

And this is why they make these...

http://www.highlandwoodworking.com/drillstopcollarset.aspx

Drill bit collars.. Really cheap too

 

[Midnight Runner]

 

[RB04]

well you inspired me to start on mine today,thought I would try another route, I used my carbon fiber impregnating resin, going to try and get smooth shiny finish, we'll see If I can avoid f'ng it up lol, I sprayed a coat of black and clear paint first to toughen up the threads a little, then sanded very lightly with a fine sanding block then did the resin, we'll see tomorrow if I need another layer before I top coat and paint the lettering

 

[ZCx]

well you inspired me to start on mine today,thought I would try another route, I used my carbon fiber impregnating resin, going to try and get smooth shiny finish, we'll see If I can avoid f'ng it up lol, I sprayed a coat of black and clear paint first to toughen up the threads a little, then sanded very lightly with a fine sanding block then did the resin, we'll see tomorrow if I need another layer before I top coat and paint the lettering

:rock: :rock: :rock:

 

[Troy's QC SRT]

Can't wait to see your results RB4

 

[ZCx]

does anyone have a photo of their hood without the liner???????:dontknow: :dontknow: :dontknow: :heeeelllllooooo: :heeeelllllooooo: :heeeelllllooooo:

 

[ramv10]