ups gives me a gift
- Thread starter Ironhead
- Start date
I would love to look at the specs of it as well . can yo pm me specs ? Please!
Oh and take alittle time and confirm rocker ratio. you bought them used and may not be what you think
Not to be a **** but why would i need to confirm anything with you.I sent him specs on cam because he is asking to buy it,are u asking to buy it or just wanting to know to be nosie,also he is asking spec on cam not rocker arms and I did not buy cam used as you are claiming.If you knew anything about strikers heads you would know the rockers for them are not the same ratio as oem ones are,but are made to run on a 1.7 oem cam,and yes I do know what ratio they are.
Have a nice day
I apologize if i offended you . you need not confirm anything for me and yes i was interested in purchasing the cam if the other gentleman declines. but would like to review the specs first. I will refrain from offering you my opinion. You can and will do as you please. thanx for your time! Oh yea, not a used cam the rockers were used were they not?
Last edited:
Pretty sure Ironheads cam has the specs listed below. As a casual reader reading this post, I am having a hard time understanding what his rockers have anything to do with this thread.
Street/Strip, lope at idle, emphasis on mid to top end power.
INT/EXH - Dur @ .050†Lift: 230°/230° RR: 1.7/1.7 Gross Lift: .558â€/.558†LSA: 114° RPM: 1000 to 6300 Redline: 6500
No worries mate ,im not offended in anyway ,,just dont understand like caveman said what my rockers have to do with subject ,and he is right the specs were posted on this thread already ,you also should keep in mind this is not my first rodeo .Offering your opinon is fine as long as you do understand i have not only done all my own engine work on both of my srt-10 trucks(Including installing cams and roller rockers on both) but i have done many other engines besides viper ones ,
If you really think i did not check the striker heads out and only took someone elses idea of them your way off base ,,Just ask Ronnie ,i bugged the crap out of him for weeks after i got them.Its all good
see smilie face 
Support Us
Become A Supporting Member Today!
