valve

S

staffie

Full Access Member
Joined
Sep 16, 2011
Messages
101
Reaction score
0
Location
Hotton - Belgium
Hello everyone.
I have a sound and I miss a cylinder.
After inspection by camera, the 9 has a valve mark on the piston.
Can the cylinder head be removed without removing the engine?
Thank you for your reply.
Staffie.
 
yes, the head can be removed without removing the engine.
 
Bonjour et merci a vous, j'ai démonté les bougies et pris les compressions.
Je suis a 9.5 - 11 sur tout les cylindres sauf le 9 qui donne 0.
Avez vous une marque pour le kit de joints de réparation.
Et pour le remplacement de la soupape.
Merci a vous tous.
Hello and thank you to you, I dismantled the candles and took the compressions.
I am a 9.5 - 11 on all the cylinders except the 9 which gives 0.
Do you have a mark for the repair joint kit.
And for the replacement of the valve.
Thank you to all of you
 
staffie said:
Bonjour et merci a vous, j'ai démonté les bougies et pris les compressions.
Je suis a 9.5 - 11 sur tout les cylindres sauf le 9 qui donne 0.
Avez vous une marque pour le kit de joints de réparation.
Et pour le remplacement de la soupape.
Merci a vous tous.
Hello and thank you to you, I dismantled the candles and took the compressions.
I am a 9.5 - 11 on all the cylinders except the 9 which gives 0.
Do you have a mark for the repair joint kit.
And for the replacement of the valve.
Thank you to all of you
Click to expand...


Staffie, I have everything you need sir. From valves to bolts to gaskets.
[email protected] is my email bud. :burnout:
 
Hi, it's not easy to access.
This is where I am now.
As soon as I know more I would make a list.
Thank you.
SRT2Slow know the cause of these damages?
How to place a photo on the forum.
 
Hello, srt2slow you are on or your engine?
How do you remove the spark plug wires from the rocker cover screws without breaking them?
And fitting gasoline to the ramp?
Removing the cylinder head without removing the engine is obvious for access !!!!
As soon as I have demounted and inspected I make a list of what I need.

Thank you all.
 
Everything can be done with the engine left in frame. (I was the first to do it :p) all in the diy section. Pm me if you have any questions.
 
Hello and thank you for the help.
I'm talking about the bottom admission bolts (9-10)
It is necessary to make a torx key to measure.
But for winding up with the torque tightening I think it's going to be sport.
In addition I have the gas fitting that takes up space!
Thank you
 
Do you have a picture of the top of the piston?
 
Hello, thanks for your reply, I will measure the pieces and look at what is flawed to make a list.
Do you have new or used cylinder heads?
Yours.
Jp.
 
I have all the parts you'll need. New piston/rod, head,pushrods,rocker arms, just send me a list boss
 
Hi, tell me if I'm wrong but it is often the cylinder 9 that is problematic
From what I see on the forum
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

image
P1010003
IMG 0233
20111218123030
Back
Top