VEC 2 LOCATION what do u think?? look good?

[SRT10VENOMOUS]

Ok here is my lame attempt at doing some edditing to 2 pics.. since my pc is waiting new programs idont have much to work with lol
neway what do u think of htis for vec 2 location... and any better ideas?

its kinda hard to see in the small pic so you have to make it bigger...

 

[Stingray]

If the front of the VECII will be flush with the console then I think it would look good.

BTW, don't quit your day job to touch-up photos

 

[SRT10VENOMOUS]

ya it will be flush so you will only see the face plate of the vec.. just checked for fitting it it JUST fits .. the beofre it hits the change compartment underneath.. and as for mounting it i think ill just cut a small hole in the plastic big enought for the leds and card reader , then butt the base of the vec 2 up behind the plastic and put the metal face plate over top of the plastic so its just one clean face .. and sink the skrews threw the plastic into the vec2 body to hold it all in place


and yes my photo shop skills rock

 

[MacksSrt]

I would say up and to the left. But, didn't Roe install it in the dash on a truck recently. I there there were pictures on one of the boards. It looked very clean.

 

[SRT10VENOMOUS]

I would say up and to the left. But, didn't Roe install it in the dash on a truck recently. I there there were pictures on one of the boards. It looked very clean.

Ya but where ROE put it well as far as the pics i seen were in the consol under the AC.. and i have my NOS/PROPANE/FUEL presure under there so no room to put it there....

Ive added 8 feet length to the harness which is about 250feet of wire added to the truck... and ive also added 100 feet of wriing with the nos setup .. so i think ive got another 350 feet or so of cable in the truck lol

 

[Blakewilder]

Put it in the AC vent lower like Roe did on the yellow trruck.

 

[SRT10VENOMOUS]

Put it in the AC vent lower like Roe did on the yellow trruck.

what ac vent ? and what yellow? and pics?

 

[Bone]

what ac vent ? and what yellow? and pics?

Call Dave at Roe, he'll tell ya.

 

[Marc T]

Prof had Roe install his in the hole just below the AC controls. Looks very clean!!

Maybe he will post a photo for ya!!

 

[mmmmtorque]

Looks good but you need to be able to access the console cable for tuning, logging, card reading verification, etc...

You could create a longer console cable and just keep it stuffed in behind the middle console.

 

[ViperTruck2933]

Ya but where ROE put it well as far as the pics i seen were in the consol under the AC.. and i have my NOS/PROPANE/FUEL presure under there so no room to put it there....

Ive added 8 feet length to the harness which is about 250feet of wire added to the truck... and ive also added 100 feet of wriing with the nos setup .. so i think ive got another 350 feet or so of cable in the truck lol

LOL, All that cable weight is going to negate the added hp, LOL.

 

[Blakewilder]

It was on the left of the driver

 

[RedRamRules]

I think higher up would be best. JMHO.

 

[SRT10VENOMOUS]

higher up where??? there is really no room to put this thing.. have to remember its liek 6 inches long with the cable clips out the back.. so you need a space 6 inches long to put this thing .. and i also have the 4x2 black box that i have to hide under that dash somewhere.. theres not that much room in this thing.. expecialy since under my sterring wheel where i could put alot of junk is full of my NOS crap wiring harnes etc etc so no room to put anything there
ooohhh well ill get that bitch in and take a final pic and .let you have a look

 

[Blakewilder]

Mount the fuc**r under the hood like mine...your never gonna use the card reader anyways.

 

[Bone]

Mount the fuc**r under the hood like mine...your never gonna use the card reader anyways.

Unless you swiching out at NOS tune for a performance tune, like I understand he is doing.

 

[SRT10VENOMOUS]

hey bone i hear you have a pic of a YF with the vec mounted in the cab .. can u post it up here

 

[Bone]

hey bone i hear you have a pic of a YF with the vec mounted in the cab .. can u post it up here

I'm out of posting MBs! I can email it to you.

 

[Bone]

hey bone i hear you have a pic of a YF with the vec mounted in the cab .. can u post it up here

Sent it to Roktman. He can email you with it.

 

[SRT10VENOMOUS]

kool.. thanx.. or just go to imagebucket.net and host it there you can host as many pics as you want... unless red gives us some unlimited posting common red give us some space ...