Vec III wiring questions

[JTS VENOM PERFORMANCE]

Does anyone have the wiring diagram for the Vec III?


have a couple q's

 

[TNVIPER]

I do stink but it's in the truck...truck is at home and I am at work......if you have a fax # I will send it to you this evening..

 

[JTS VENOM PERFORMANCE]

I do stink but it's in the truck...truck is at home and I am at work......if you have a fax # I will send it to you this evening..

Thanks bud! I will Pm it to you sir :rock:

 

[Prof]

And I have the data for the VEC II if it might help...

 

[JTS VENOM PERFORMANCE]

Well what it is , I had a vec II converted to a vec III, now I have a new vec III and there is an extra wire the II didnt have , its baby blue:dontknow:

also want to double check the 02 connectors , Ithink one is blue and one is white/green,

on the vec III they are blue, and green, and want to make sure they are connected right, one goes to the pcm , the other to the harness

 

[TNVIPER]

PM received...I will fax it to you later today..

 

[FlyingLow]

Master Slave
1. Ground - 1. Ground -
2. 5V+ Out 2. 5V+ Out
3. Not Used 3. Not Used
4. Analog 4 In Set for IAT sensor input in software settings 4. Analog 4 In
5. PWM 1 Out Used to activate W/M pump, injector or relay 5. PWM 1 Out
6. Analog 3 Out Sends output of internal MAP sensor to slave board 6. Analog 3 In
7. Analog 2 Out 7. Analog 2 Out
8. Analog 2 In 8. Analog 2 In
9. Analog 1 Out 9. Analog 1 Out
10. Analog 1 In 10. Analog 1 In
11. INJ #9 Out Ground out to pulse injector 11. INJ #10 Out
12. INJ #9 In From PCM, tied in with Load box 12. INJ #10 In
13. Cam Output for Gen1 and not used in 1996 and newer engines 13. Crank Out
14. Cam Input for Gen 1 / Crank Input for 1996 and newer engines 14. Crank Input
15. INJ #7 Out Ground out to pulse injector 15. INJ #8 Out
16. INJ #7 In From PCM, tied in with Load box 16. INJ #8 In
17. INJ #5 Out Ground out to pulse injector 17. INJ #6 Out
18. INJ #5 In From PCM, tied in with Load box 18. INJ #6 In
19. INJ #3 Out Ground out to pulse injector 19. INJ #4 Out
20. INJ #3 In From PCM, tied in with Load box 20. INJ #4 In
21. INJ #1 Out Ground out to pulse injector 21. INJ #2 Out
22. INJ # 1 In From PCM, tied in with Load box 22. INJ #2 In
23. Ground - 23. Ground –
24. 12 V+ Power 24. Not Used

 

[Prof]

Tony have you tried to call Dave or Sean...they might answer the phone today, I think Sean is just back from Detroit.

 

[FlyingLow]

Here are the attachments.

 

[JTS VENOM PERFORMANCE]

Tony have you tried to call Dave or Sean...they might answer the phone today, I think Sean is just back from Detroit.

yeah , no answer

 

[JTS VENOM PERFORMANCE]

Thanks Flyn low:rock:

 

[FlyingLow]

I have the whole CD if you need other info.

 

[JTS VENOM PERFORMANCE]

I have the whole CD if you need other info.

Thanks dude, but what happened is I got pissed and ripped the ol vec out and stupid me forgot the wire code

 

[FlyingLow]

Thanks dude, but what happened is I got pissed and ripped the ol vec out and stupid me forgot the wire code

HA!!!!!!! The stuff I posted above was on the CD.

 

[Prof]

Thanks dude, but what happened is I got pissed and ripped the ol vec out and stupid me forgot the wire code

Been there, done that...but, rather than screw with it I just paid to get it re-done...sometimes its better to swallow your pride. Besides I don't have any technical ability...just a temper!

 

[JTS VENOM PERFORMANCE]

LOLOL I know whatya mean

But with 505 wanting to hang my testicles from his mirror , I figered I best getter runnin


Just finished the rewire, time for fire:rock:

 

[Prof]

I love your spirit, enthusiasm and wife!

 

[JTS VENOM PERFORMANCE]

I love your spirit, enthusiasm and wife!

we love you too sugar, she is at the beach now buk nekid in the backyard, get ya radar goin

 

[tinygiants]

I just sent copies of all of my install instructions.

 

[JTS VENOM PERFORMANCE]

I just sent copies of all of my install instructions.

to?