viper emblems on door

[scottputty]

who on the forum sells or knows how to get the viper emblems i see on some of the truck doors in place of the dodge emblem.... scott

 

[Nowwhat]

contact approved vendors.....or

http://cgi.ebay.com/ebaymotors/Mopa...hZ019QQitemZ8072506664QQrdZ1QQsspagenameZWD1V

 

[scottputty]

thanks mike

 

[mauiSRT/10]

You mean these!!! They are a must!

patrick

 

[energetic]

Looking good.

 

[silverqc]

contact bigdodgeinalaska

 

[amoparman]

I wonder if BDIA also carries the Viper lettering I've seen on a members truck. Not sure who's it was though.


Stretch

 

[silverqc]

he can make anything you want in almost any color pm him

 

[vipersrt10]

viper emblems

I found these on ebay..

 

[amoparman]

I found these on ebay..

I saw them too. Was wondering what they would look like on the side of a red truck. I think I like the stock Viper emblems a bit better, but they do look good!


Stretch

 

[indyCoder]

What does it take to get the emblems off the tailgate and hood as well as the Ram on the doors?

Thanks,

 

[indyCoder]

I found these on ebay..

Sorry for the off topic, what brakes are those. I haven't found any talk about how good the factory rotor and caliper setup is.

Thanks,

 

[Nowwhat]

What does it take to get the emblems off the tailgate and hood as well as the Ram on the doors?

Thanks,

All the emblems except the hood will come off with fishing line, goof off and elbow grease....the hood ram leaves a divot on the hood.....good luck....

 

[mauiSRT/10]

What does it take to get the emblems off the tailgate and hood as well as the Ram on the doors?

Thanks,

Some fishing line to saw off the emblems. Some Goo Gone or similar to disolve the double stink gunk. Soak the glue/gunk with the GG, drink a cold beer then using your fingernails start rubbing it off. If you collect the gunk in balls you then can use the ball to dab off the remaining gunk. Take your time drink another beer and it will all come off. Wash and wax that spot and your done.

The hood one has a puka (hole) behind it in the hood. Dont take that off. Ram lettering on the doors and tailgate Dodge lettering come off easy. The ram emblem on the tailgate if you have an 05 or 06 I am not sure of.

patrick

 

[Silverback]

Some fishing line to saw off the emblems. Some Goo Gone or similar to disolve the double stink gunk. Soak the glue/gunk with the GG, drink a cold beer then using your fingernails start rubbing it off. If you collect the gunk in balls you then can use the ball to dab off the remaining gunk. Take your time drink another beer and it will all come off. Wash and wax that spot and your done.

The hood one has a puka (hole) behind it in the hood. Dont take that off. Ram lettering on the doors and tailgate Dodge lettering come off easy. The ram emblem on the tailgate if you have an 05 or 06 I am not sure of.

patrick

Ram emblem on the tailgate is the same as all the other emblems. Fishing line, beer, adhesive remover, more beer, rub a bunch, a bunch more beer and then wax and you will be set.

 

[SANCHOBA]

http://zero-altitude-flight.com look for the ram srt-10 clossoines under labels and plaques. these are very nice and are priced right. they have a curved one for the hood if you call and inquire, but stay away from these (unless they have corrected them) they don't have enough curve in them and leave a gap at the bottom:dontknow: