water meth ? Help!!

Dom426

Full Access Member
Joined
Apr 26, 2007
Messages
13,813
Reaction score
1
Location
Farmington, N.M.
i am running a vec 3 . the pump works fine i have good power and ground but it is not spraying undre boost.....there is a little black box 2x3 and when i push the button with the key on nothing happens....any ideas i think that it is the little black box:dontknow:
 
LoveThisTruck said:
It's been sitting for a while... make sure it's not clogged.
i have the line disconnected before it goes into the intake and when i push the button on the box the pump does not kick in at all(with the key on)
 
can't ya just pour it down the carb????
 
id check the wiring if its netihng like my roe i had to rewire due to everything being tore down and shit getting moved around but i believe the red buttom is a test purge at least like stated on the roe and i know this is smart ass ? but id check ur tank make sure u got meth in it lol
 
tap the pump with hammer or screwdriver.. pump maybe bad...if starts working again then you found the promblem
 
FerrariTruck said:
tap the pump with hammer or screwdriver.. pump maybe bad...if starts working again then you found the promblem
the pump works .... it just does not come one under boost i have a really good feeling that it is the little black box with the button on it i just dont have another one to check it
 
Dom I had 2 of those black boxes go bad....if you push the red button and the pump does not come on then it is not working (ignition may need to be on)....call Sean Roe for replacement if you got it from him...
 
Does the green led come on when you press the button?

The box is probably the problem...tap it a few time and tap the pump too. The hose is a really small diameter, and can get clogged.

Best bet is to call Sean first thing in the morning. (904) 529-1219 (I have his cell if you are in a real hurry.)
 
Hey Dom,did you put on a new pump? I had the exact same problem a couple days ago,I pulled the line off the nozzle,pushed the purge button on the black box to purge it and nothing would come out of the pupm,I tried bleeding alll different ways,nothing worked,I put a new pump on yesterday,pushed the button for 2 maybe 3 secs and it was shooting out about 6-8feet.
Check to see if there is power on the little box(key on and switch on),there should be two little wires coming out,check them(either one) and it should light up your test light to indicate theres power to the pump.
 
Yellow venom said:
Hey Dom,did you put on a new pump? I had the exact same problem a couple days ago,I pulled the line off the nozzle,pushed the purge button on the black box to purge it and nothing would come out of the pupm,I tried bleeding alll different ways,nothing worked,I put a new pump on yesterday,pushed the button for 2 maybe 3 secs and it was shooting out about 6-8feet.
Check to see if there is power on the little box(key on and switch on),there should be two little wires coming out,check them(either one) and it should light up your test light to indicate theres power to the pump.
i have positive ...but it is ground activated its not letting the ground go through the box to the pump...i hooked the pump up the 12 volts with a good ground and that thing shoots fluid everywhere
 
505'sFastestViper. said:
i have positive ...but it is ground activated its not letting the ground go through the box to the pump...i hooked the pump up the 12 volts with a good ground and that thing shoots fluid everywhere

That's what she said:p
 
505'sFastestViper. said:
i have positive ...but it is ground activated its not letting the ground go through the box to the pump...i hooked the pump up the 12 volts with a good ground and that thing shoots fluid everywhere

Ok,so if thats all working then its the box then.
 
I hope I don't run into the same problem. I haven't tested my meth pump yet.
 
Did you stop and ask tate tot if he had any spare parts lying around pal?
 
IT WAS THE LITTLE BLACK BOX EVERYTHING IS WORKING GREAT THANKS JUSTIN AND EVERYONE ELSE FOR THE HELP!!!!!!!
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top