What Gauge should i buy????

[CubanEvo]

So i just bought a gauge pod toda and an AEM Uego but i still have two holes left what other gauges should i get and do they sell any thing that maches the oil temp gauge.


Im thinking of a nitrous gauge because i might get nitrous in 2 months

Here is the gauge pod i got..

http://www.xtremediesel.com/index.asp?PageAction=VIEWPROD&ProdID=437

 

[099 FEVER]

Mopar sells a nitrous gauge and a fuel pressure gauge with the SRT Logo. They are a close match to the oil temp gauge. A bit pricey but nice.

 

[CubanEvo]

Mopar sells a nitrous gauge and a fuel pressure gauge with the SRT Logo. They are a close match to the oil temp gauge. A bit pricey but nice.

Yeah i saw tem but they are just to much.

 

[CubanEvo]

any help

 

[SilvrSRT10]

Since your planning on nitrous, get a nitrous pressure gauge. ebay has them for as low as $30. Then get a matching fuel pressure gauge so you can keep an eye on that as well. Get the electric fuel pressure gauge. You don't want to be plumbing fuel into the cab.

You might consider the "A" pillar gauge pod instead of the dash pod. It's easier to run and hide wires etc. It looks like the dash mounted pod would require you to drill into the top of the dash to run the needed wires.

http://cgi.ebay.com/ebaymotors/AUTO...017QQitemZ270179920089QQrdZ1QQsspagenameZWDVW

 

[CubanEvo]

ok i think im gona go with the AEM UEGO, AEM FUEL GAUGE, and im still looking for a nitrous gauge i just dint know which one. Should i get a mechanical or electric nitrous gauge.

 

[SilvrSRT10]

Should i get a mechanical or electric nitrous gauge.

That's entirely up to you. I think the mechanical one's are cheaper. But the electrical ones are probably easier to install. Do you want the possibility of having a nitrous leak in the cab? If not then electric gauge is your answer.

 

[CubanEvo]

what about this gauge pod http://store.summitracing.com/partdetail.asp?part=ATM-18017&view=32&N=700+

 

[SilvrSRT10]

what about this gauge pod http://store.summitracing.com/partdetail.asp?part=ATM%2D18017&view=32&N=700+

At least with that one you won't have to cut a hole in the dash. The "A" pillar is still easier in my opinion. With that one you'll need to find a way to run the wires all the way up there.

 

[CubanEvo]

I still like this one man http://www.xtremediesel.com/index.as...ROD&ProdID=437

beside it go's all the way in the back of the dash and i could slide the wires through the speaker hole...

 

[099 FEVER]

If you use the piller pod it's easy to feed the wires thru to under the dash. There is a firewall plastic plug near the steering column to feed wires thru to hook up the sensors. They also make a safety device (isolator) that is used with the installation of a mechanical fuel gauge in the passenger compartment. They are available from Jegs or Summit.