What Size Lines?

[Psycho Mythic]

Im buying a used JMB catch can today but it wont come with any lines/hose for the intake. What size line does the JMB cans take? Id like to get some steel braided on its way, thanks!

 

[FastSRT19]

I've been looking for some braided lines for my JMB catch can too...i think they are 3/8 inside dia.:dontknow:

Anybody? We need some more bling! Help!

 

[TNVIPER]

I will look when I get home...thinking 5/8..:dontknow:

 

[johnnybravo]

Did you try asking JMB Justin yet?

 

[blackviper]

I think they're more like 1/2 inch. I'm also looking to do a braided hose upgrade.

 

[BriteCrawler]

I'd be interested, how would you do this? Rubber clamps off the valve covers to braided, joined by a T, to the catch can? Looking forward to Justin's input on this as well.

 

[yellowfever#154]

I'd be interested, how would you do this? Rubber clamps off the valve covers to braided, joined by a T, to the catch can? Looking forward to Justin's input on this as well.

Best way would be to remove the factory nipples and have the covers drilled and threaded with either a pipe thread or a O-ring boss (ORB) thread. Then you can thread in fittings and use the proper end on the hoses. Im considering doing this with mine if I can get the factory nipples out without hurting my powdercoating.

 

[JMB Justin]

Best way would be to remove the factory nipples and have the covers drilled and threaded with either a pipe thread or a O-ring boss (ORB) thread. Then you can thread in fittings and use the proper end on the hoses. Im considering doing this with mine if I can get the factory nipples out without hurting my powdercoating.

This is the only way to properly do braided lines for the catch can. The nipples come out pretty easy with a little heat.
Justin

 

[Chuck B]

Kevan did a nice write regarding this...

Kevan's Awesome Writeup

 

[Psycho Mythic]

Sorry, i havent been around today, Justin told me the catch can lines are 1/2", ill let everyone know and maybe get some pics when i do the braided line setup, but until then if anybody knows where to get some good 1/2" braided line that would help

Thanks alot guys!

 

[FastSRT19]

Kevan did a nice write regarding this...

Kevan's Awesome Writeup

i think Stinker should gather up all the stuff needed and sell it as a set.. :dontknow:

Please!?:marchmellow:

 

[JTS VENOM PERFORMANCE]

i think Stinker should gather up all the stuff needed and sell it as a set.. :dontknow:

Please!?:marchmellow:

I did it along time ago, back in late 04 I think, cnat remember, but I also ran dual catchcans,

i can do it bud no prob, and I am sure he willprob say I am copying his stuff once more like he usually does, even made accusations I was making dinero off his ideas

but you know what? I really dont care, if you guys want it , i can def do it for ya bud,, with either the hose finishers like the heater hoses, or if you can tap the valve covers, with a reg an fitting either way good sir

 

[FastSRT19]

I did it along time ago, back in late 04 I think, cnat remember, but I also ran dual catchcans,

i can do it bud no prob, and I am sure he willprob say I am copying his stuff once more like he usually does, even made accusations I was making dinero off his ideas

but you know what? I really dont care, if you guys want it , i can def do it for ya bud,, with either the hose finishers like the heater hoses, or if you can tap the valve covers, with a reg an fitting either way good sir

I would rather not pull the valve covers again lol (lazy) Any way you can do it bud is fine with me.:burnout:

 

[Psycho Mythic]

I did it along time ago, back in late 04 I think, cnat remember, but I also ran dual catchcans,

i can do it bud no prob, and I am sure he willprob say I am copying his stuff once more like he usually does, even made accusations I was making dinero off his ideas

but you know what? I really dont care, if you guys want it , i can def do it for ya bud,, with either the hose finishers like the heater hoses, or if you can tap the valve covers, with a reg an fitting either way good sir

Your awesome Stinky, i call dibs on first set. Soon as you get this up lemme know who to pay

 

[ZCx]

very nice article:rock: :rock: :rock:

 

[JTS VENOM PERFORMANCE]

ok I should know for sure by monday latest tuesday

but for the kit to use fitting in the valve cover, meaning taping the valve cover, about $125

the kit without tapping the valve cover should be about $100

those are NOT set in stone as of yet, those are just prices we half way worked up over the phone, he is going to put them in kit form, with steel braided line, and let me know, so by tuesday I shoulld know more for you fellas interested

 

[BriteCrawler]

ok I should know for sure by monday latest tuesday

but for the kit to use fitting in the valve cover, meaning taping the valve cover, about $125

the kit without tapping the valve cover should be about $100

those are NOT set in stone as of yet, those are just prices we half way worked up over the phone, he is going to put them in kit form, with steel braided line, and let me know, so by tuesday I shoulld know more for you fellas interested

How would you do this without tapping Tony?

 

[includemeout]

How would you do this without tapping Tony?

Ya can't,....................................I would let Mikey tap Tony

 

[FastSRT19]

ok I should know for sure by monday latest tuesday

but for the kit to use fitting in the valve cover, meaning taping the valve cover, about $125

the kit without tapping the valve cover should be about $100

those are NOT set in stone as of yet, those are just prices we half way worked up over the phone, he is going to put them in kit form, with steel braided line, and let me know, so by tuesday I shoulld know more for you fellas interested

I'm in for a set without tapping required on the covers. I'll break out my CC for this and the plug wires etc all at once if thats ok with you Stink.

 

[blackviper]

I'm in for a set as well. Let me know when it's available. What type of ends are you going to offer for the none tapped version?