Psycho Mythic
Full Access Member
Im thinking of trading my daytona wing for an 04 stocker wing, but it will need to be modified...what are the stock 04 wings made of?
5_0_BAIT said:fiberglass.
Lol wtf iz that posed to be?labontecsi said:unobtanium
Psycho Mythic said:Lol wtf iz that posed to be?
Ooooohhhhh :congrats:ViperJeff said:Well, it was used in two movies....
The Core and Avitar
Black1 said:Be careful, if you are planning on cutting it in half.... ALL of the modified one's I've seen have cracked. The wing flexes quite a bit under normal use. You will have to beef it up A LOT if you chop the center out of it.
Psycho Mythic said:Thanks for the tip, I'm wondering if it would be better to cut it closer to the side :dontknow:
WOT said:Get an '06 wing with center support.
This is what i worry about, i really think cutting it as close to the side as i can would be the best bet...and much strengthening of course...FSTJACK said:I have been in a truck and at over about 90 mph the wing takes a tremendous beating.
As the speed increases from there the wing moves up and down at least 3 inches.
The movement is very fast and very radical.
The loads on the wing are very high.
WOT said:Get an '06 wing with center support.
Black1 said:I agree... if it fits. I believe the '06 wing would create more downforce as well (at least, it looks like it should ).