Wildman

[WILDMAN]

I am going to upgrade from my JMB stage II traction kit to Caltrac's. Can anyone tell me what is envolved in putting them on. I have a pretty well equipped shop. Some detailed instructions would be great.

Thanks in advance

Wade

 

[eddie102870]

not to hard we did one side at the time, they come with detailed instructions. instead of beating the bushing out its easier to use a torch and burn the old bushing and knock it out, while your burning the old bushing out put the aluminum piece in the freezer so it will go in faster use a 2x4 so you wont scar it up. you can call me while your doing it at 334-695-1202 and i can help you.real simple set up wont take you but about a hour if you have someone to help you.

 

[stick]

pretty easy,,, but is a 2 man job

you do have to take out the bottom leave spring.

you wont be dissapointed,,,,but I crank mine down at least 1 full turn

 

[WILDMAN]

Thanks a bunch. I will give it a try. I doesn't sound to hard.

Wade