Would this work?

[ntw0rk]

If you hid the switch somewhere out of sight?

http://www.metacafe.com/watch/815409/effective_anti_theft_security_for_car/

Kind of cool, if you can hide the wires and the switch well. Although it won't stop anybody from stealing all of your stuff from inside the truck, or from trashing it because they can't take it...

 

[RoadRunner]

I'm no electrician so I'm not sure about potential problems that may cause.

If it was safe, I like it.

 

[TheSickness]

I'm no electrician so I'm not sure about potential problems that may cause.

If it was safe, I like it.

Yes it does work

 

[Prof]

You could do it with the ignition or just the push to start button...

 

[TheSickness]

You could do it with the ignition or just the push to start button...

You could also wire the push button to send an electrical shock if needed...

 

[Gaboon]

You could also wire the push button to send an electrical shock if needed...

There ya go. have enough to knock the thief out:rock:

 

[ViperJeff]

Yea, if i was to do something like that. The push to start button is where I would splice in the kill switch

 

[Prof]

Can I get the switch in a variable model that way I can adjust it to the point where it gives me wood when I want it...never mind I would probably need a 24 volt system.

 

[redice2]

how come i see next mod a small hole drilled into center of the button or a metal ring around it with a stun gun on switch hooked to it so then you take a 3 position switch (on off on) so you hook ignition to one side on the other side on you hook the stun gun. now when you flip the switch from on ignition to on stun gun truck is dead intruder gets a bit of a shock when they hit that start button though

trick would be to place a ground somewhere so intruder also was touching it so voltage would go through humm maybe some small metal pins or nails in the seat stitch? just a though lol

 

[Black1]

Yep it works... Brian had one on his Camaro. :rock: