WTB Ported Polished heads

[kyle's srt10]

I have my truck pretty much down to the bare block right now getting the cam installed.. Thought I would see if I could get lucky and somebody have some ported and polished heads they would sell while I got it all apart:dontknow: Or who is the best place to use for our heads and about how much $$$ is it?

 

[Bone]

Taliban Dan can port them

 

[ViperTruck2933]

You are probably going to have to send yours out for the porting. Buying a preported set is going to cost some serious jack.

Just paying someone to port and polish your existing heads is going to cost you anywhere from $1500 (if you are lucky enough to find a competent local porter) to $3500 or more for the big names like Greg Goode Cylinder heads or Indy Cylinder heads.

 

[Bone]

I agree, not too many places have cores on hand AND ported.
They are NOT cheap BTW.

 

[kyle's srt10]

Thanks guys I think I am going to just keep stockers for now.. The cam ,ported polished throttle body,MSD wires,hardned pushrods,stiffer valve springs, and one of a kind custom exhaust will be enough for my pocket book now

 

[pissant#420]

extrude honed wet abrasive media flowed through ports used to be popular in 90's in iron heads might be worth checking into

 

[pissant#420]

where in Ark are you

 

[kyle's srt10]

where in Ark are you

Romance.. Its pretty close to searcy