Recent content by V10SC_V12TT

  1. V10SC_V12TT

    Roe Fuel pump install pics request

    You should consider using 'Stepless Ear Clamps' or Fuel Injection clamps, NOT hose clamps. Hose clamps damage the hose and could pop-off under pressure. Good luck with your install!
  2. V10SC_V12TT

    Possible Detonation issue

    I never use extended tip plugs for forced induction. What is it you wanted to know?
  3. V10SC_V12TT

    Possible Detonation issue

    Scope is a wise idea as well as a leak-down. You may be experiencing an "in boost" fuel system failure. You need to inspect all Paxton fuel system components to ensure they are properly functioning. It could be as simple as loosing the signal vac/pressure line or fuel pump/FMU issues. With...
  4. V10SC_V12TT

    full exhaust and 93oct tune results

    From your explanation, it doesn't at all seem to appear vicious. You just need to discuss your findings with Torrie and see what he can do for you regarding your tune. The truck should make more power with your current mods, but sometimes it's hard to hit the tune spot-on the first time around...
  5. V10SC_V12TT

    Fastest Dodge Ram in the USA!

    Wow, hitting the brakes before the shoot deploys can kill you! You have to stay in it...then hit the brakes. The good news is that truck was on a rail; carried the front wheels like a champ! Real nice! Easy 6's coming! Congrats!!! :rock::rock:
  6. V10SC_V12TT

    What do you think of these wheels?

    I like them... clean and close to the factory look :rock:
  7. V10SC_V12TT

    Many Thanks to Stinker, V10SC_V12TT and TNVIPER

    Your very welcome! Glad it worked out for you! :rock::rock::rock:
  8. V10SC_V12TT

    part#

    Spray Lysol in the fresh air intake.
  9. V10SC_V12TT

    injectors

    SAME as 2003 - 2006 Vipers. :rock:
  10. V10SC_V12TT

    OMG!! Terrible 10 photos

    I've purchased parts from them, always had good results. Call and ask for Gus.
  11. V10SC_V12TT

    oil pump

    What is your email address? I can send you the procedure.
  12. V10SC_V12TT

    oil pump

    What he said :)
  13. V10SC_V12TT

    oil pump

    I don't see any reason why it would be bad in the first place. As long as some oil or assembly lube was trapped in the timing cover when the cover was left sitting. If your still concerned (or if the parts were left-over from a previous build or failure) you may remove the timing cover, then...
  14. V10SC_V12TT

    oil pump

    Define sitting for almost 3 years? Is this in a vehicle that hasn't run, but could if you do a complete service, and your concern is regarding the oil pump?
  15. V10SC_V12TT

    Water pump, oil pump and PU, head bolts, stock injectors

    We have everything in stock if you need. Inspect your timing cover and make sure it doesn't have any gouges or lines in it.
Back
Top