Search results

Thanks for the tip! I saw them but didn't know if they would work any good. If it is at least as good as the stock clutch I would be satisfied. If no one has a nice used one I will give it a try. I don't want to spend the $500-$700 for a better one at this time.

I need a stock clutch for a 2004 Ram SRT-10 in excellent condition. One in AZ would be great so I could save shipping! I live in Phoenix. Let me know how much you want for it. Thanks!

I thought it was the stock clutch. Can you tell by the picture if it is the stock pressure plate? Should I replace the Slave while it is apart even if it is working OK? Where is a good place to buy all of the parts? Thanks!

The adapter does fit of the transmission splines, and then the outer splines fit into the clutch splines. So it is an adapter for a different clutch plate. I thought it was a stock setup, but must be aftermarket. Can you tell if the pressure plate looks like the stock one or will I need to...

I have just finished installing a 2004 Ram SRT-10 motor in my 1959 Plymouth and after driving it a few minutes the clutch stuck in the disengaged position. The clutch pedal felt normal, but the clutch would not engage. I am using a Wilwood master cylinder with the same size piston as the stock...

Thanks, next weekend I will have time to pull the transmission and take a look. Will post a picture of what I find. Thanks for the help.

I am using a Wilwood master cylinder and it has new fluid. I opened the bleeder on the slave to see if there was residual pressure and it did not help engage the clutch. Here is the vehicle. The worlds fastest 1959 Plymouth! I am in the process of sorting it out and never thought the clutch...

I have a 2004 Viper Truck engine with 6sp and the other day when I put it in 1st gear and let out the clutch nothing happened! It was like someone had removed the driveshaft. All gears felt like they engaged properly with the shifter and the clutch pedal feels the same. (I did look and the...