the-bigun
New Member
heh everybody, just had boomer's clutch kit (centerforce) installed and have seen alot of questions on how and where the "shims" go!!!! as for the slave cyl. shim, it can only go one place, can't screw that up but the shim for the master cyl. i'm posting pix of!!!!! the studs are just barely long enough under the dash for the retainer plate (you can just make them out)!!! hope this helps somebody!!!
p.s. it's killing me driving like an old lady for 500 mi.
![DSCF0869.JPG DSCF0869.JPG](https://www.vtcoa.com/data/attachments/10/10327-25c04f14c3f4058970428fd4adea9999.jpg)
![DSCF0871.JPG DSCF0871.JPG](https://www.vtcoa.com/data/attachments/10/10328-8a482829d5cb197a4a9eddc7fa5870ee.jpg)
![DSCF0872.JPG DSCF0872.JPG](https://www.vtcoa.com/data/attachments/10/10329-f9f0170c5fe62cad5352e0b95368a9a0.jpg)
p.s. it's killing me driving like an old lady for 500 mi.
![DSCF0869.JPG DSCF0869.JPG](https://www.vtcoa.com/data/attachments/10/10327-25c04f14c3f4058970428fd4adea9999.jpg)
![DSCF0871.JPG DSCF0871.JPG](https://www.vtcoa.com/data/attachments/10/10328-8a482829d5cb197a4a9eddc7fa5870ee.jpg)
![DSCF0872.JPG DSCF0872.JPG](https://www.vtcoa.com/data/attachments/10/10329-f9f0170c5fe62cad5352e0b95368a9a0.jpg)