Ground force rear shocks bounding

[whammo]

Installed the ground force lowering kit, and the rear shocks are bounding bad. You go over a bump and the rear end bounds three times. Even going down the road the rear end bounds like there are no shocks installed, (not bottoming out). Is this normal and;or what can I do? It's making the truck look cheap!

 

[moparracing]

are you sure you can't still use the stock shocks with your kit ?? i did with my lowering job.......

 

[JTS VENOM PERFORMANCE]

is it an rc or a qc? makes a difference

 

[ZCx]

stayed with the Bilstein's on mine. no probs. RC though

 

[FATJACK]

Did you cut down your bump stops? If not that bitch will ride rough, and you can leave your stock shocks on it if there is a shock problem. The bump stops are about 3 to 31/2 inches long, need to be cut down to 1"

 

[bigike]

I thought friends didn't let friends buy Ground Force?

 

[whammo]

It's an Rc. I didn't know if I could put the stock shocks back on which are way better. I thought maybe I would run out of shock travel before I hit the stops.

 

[JTS VENOM PERFORMANCE]

use the oem shocks bo, as long as the rear is no lower than 3 inches you should be fine

 

[Big Worm]

I had then leave the bilstein's on there. Mine work great.