Ideas for the new year

[JTS VENOM PERFORMANCE]

Allright family and friends

Looks like I may try vendin at the first of the year, not sure how it willwork out but will try

Just remember I do have a "real" job so things will go slow at first.

but here is a list of things I am workin on..

front replacement springs, about 1.25 inch lower than stock.

working on 04-05 RC's right now

Stabalizer bars that are custom made and heavier duty than stock

rear block kits from 2'' to 3''

and a air ride for the front and rear with a light duty 4 link that should be easy to install.........hopefully

I may also have a line on a upper lower, and hood billet grill deal...not sure of it yet

also going to talk with bilstein shocks for replacement shocks for lowered trucks tommorrow.

Please be patient and easy on me

gonna focus on what I know , suspension, and work with a few of the other vendors here.

but if ya got ideas, let me know, I will see if I cna make it happen

 

[EMT/SRT]

sounds great! good luck!

 

[SRT-10 OF SWEDEN]

Looks like next year will cost me a shit load of money.....

Stefan....

 

[Wifey]

Please be patient and easy on me

Congrats for havin the balls to try it out :rock:

BE EASY ON YOU :dontknow: :dontknow: :dontknow:

- GIMME A B-R-E-A-K :elefant: :bebored:

 

[TNVIPER]

Allright family and friends

Looks like I may try vendin at the first of the year, not sure how it willwork out but will try

Just remember I do have a "real" job so things will go slow at first.

but here is a list of things I am workin on..

working on 04-05 RC's right now


but if ya got ideas, let me know, I will see if I cna make it happen

Dont forget the model that turned the lights out on the Ram SRT10s...

 

[JTS VENOM PERFORMANCE]

Dont forget the model that turned the lights out on the Ram SRT10s...

I havent bud

Got a set of 04 springs now, and goin to try them first, then will need a spring for an 06

 

[505'sFastestViper.]

very cool stinker

 

[wyoramsrt-10]

Keep us posted on all those new products oky doky!

 

[KRAZYSRT10]

Allright family and friends

Looks like I may try vendin at the first of the year, not sure how it willwork out but will try

Just remember I do have a "real" job so things will go slow at first.

but here is a list of things I am workin on..

front replacement springs, about 1.25 inch lower than stock.

working on 04-05 RC's right now

Stabalizer bars that are custom made and heavier duty than stock

rear block kits from 2'' to 3''

and a air ride for the front and rear with a light duty 4 link that should be easy to install.........hopefully

I may also have a line on a upper lower, and hood billet grill deal...not sure of it yet

also going to talk with bilstein shocks for replacement shocks for lowered trucks tommorrow.

Please be patient and easy on me

gonna focus on what I know , suspension, and work with a few of the other vendors here.

but if ya got ideas, let me know, I will see if I cna make it happen

Tony...you know I have always liked you...right??

 

[Silverback]

Damn, I may have to buy another truck just so I can order some of your parts.

Good luck to you Tony. I know your products will be nothing but the best.

 

[SilvrSRT10]

Good luck with the new venture Tony. If you need a parts test mule. give me a shout.

 

[newmexicoviper]

Sounds cool. If you need any measurements or things from an 06 drop me aline. Hope it works out like you want it too.

 

[JTS VENOM PERFORMANCE]

Thanks guys, may just take ya'll up on it

 

[joemags54]

Congrats Stinkmeister general!!! :rock: Wishing you the best always. PS if you make headers, maybe you can get you know who, finally, to install a set!

 

[JTS VENOM PERFORMANCE]

LOLOLOL that would take a miracle

 

[JTS VENOM PERFORMANCE]

cool stinker. hope it all works out well. what about drop spindles? would these keep the geometry the same in the front?

I talked to a ton about drop spindles, and well i jsut dont know, but will look into it a tad further brro

 

[FATJACK]

:burnout: :burnout: Stink, surely you could fab up some long tube headers that wouldn't cost us 1000.00. Good Luck Tony

 

[TheSickness]

Sometimes I scare myself :adore: :adore: :evil:

 

[HOT RAM]

 

[VA VIPERAM]

Drop Spindles!!!