Will at RSI
New Member
- Joined
- Dec 11, 2009
- Messages
- 1
- Reaction score
- 0
Nice Picture!
I got the modified Viper hydraulics with the truck, so I mind as well swap them in. I was planing on keeping the stock PP can you get just a center force clutch disc?
Nice Picture!
Nice Picture!
No sir it's a combo deal from CENTERFORCE and I recommend it as well. It will NOT have a hard pedal if that's your concern.
Will has tons of good knowledge on the viper platform, good guy to have here hopefully he posts up more.
Oh and on the center force clutch, apparently they are not good on our trucks and are meant for more high revving cars as there clamping forces is due to centrifugal forces and since our tq is so high down low they do not clamp down as much as they should be when we are coming out of the hole...
i've seen a similar silver RC put down almost identical numbers...
you didn't buy that one out of GA, did you?
welcome either way!
Nice collection! I'm afraid that your transmission troubles will be the plastic shift fork pads inside the T56. If that is the case be sure to upgrade to the bronze pads.
Eventually you will loose reverse all together, happened to me.
i've seen a similar silver RC put down almost identical numbers...
you didn't buy that one out of GA, did you?
welcome either way!
This was Sergio's old truck.
Nope right here in Houston, local. :beer:
I'll probably drive it up to Texas Drive train and have them go through it for me. They built a custom geared faceplatted t56 that is in my WS6. Great guys and they know their sh!t. Also very reasonably priced.
Nope right here in Houston, local. :beer: