10-1=9
Full Access Member
I would say a Forged bottom end is the bare minimum! I melted one of those cheap stock pistons N/A
I would say a Forged bottom end is the bare minimum! I melted one of those cheap stock pistons N/A
I'm going to stay under 150. Well I'm going to spray 150. Truck don't get used much so will only be spraying every blue moon. This is what I'm doing
Nitrous outlet plate system
Nitrous outlet window switch
A/f gauge
Purge kit
Sct tuner with a nitrous tune.
Anything else i MUST have?
Haha yeah you have a point there ironhead I'll get a bottle warmer
Bottle locations guys? Where you putting them?
Somewhere in the cab
Suggest an alternate to a plate. If you use a Taylor Helix throttle body plate and tap it for nozzles on both sides you spray uniform to both sides of plenim. It's also a bolt on and no need to modify intake. Available from Summit Taylor Helix p/n 83005 90 bucks.
View attachment 54159