RIP- Pics of Wrecked SRT10's

spydertt

Member
Supporting Member
Joined
Feb 10, 2008
Messages
349
Reaction score
5
Location
KS
I'll try to update as I find them and list VIN #'s for VIPPERJEFF so he can update his registry. Jeff has seen the first 2 pics. The last one is #3D3HA16H04G280319. I can also list milage if you want.
 

Attachments

  • 11663691_2X.jpg
    11663691_2X.jpg
    81.6 KB · Views: 11,819
  • 11853601_2X.jpg
    11853601_2X.jpg
    90.3 KB · Views: 1,653
  • 21625220_1X.jpg
    21625220_1X.jpg
    91.1 KB · Views: 12,930
My first 10 was a rebuilder, VIN # 3D3HA18H25G787673. It lives in KS.
 
3D3HA16H75G776851 Black clear title, says front end damage
3D7HA18HX6G199715 Red
3D7HA18H55G834340 Silver
3D3HA16H55G733917 Silver w/tape on window
3D3HA18H15G856000 No Pic Yet
3D3HA16H74G278051 Black Hard Hit
3D3HA16H74G235278 Red/White stripes

I'll try to get more organized, but here are a few more I found. Makes ours worth more, fewer on the road.
 

Attachments

  • 8059295_1_I.jpg
    8059295_1_I.jpg
    35.6 KB · Views: 644
  • 7984358_1_I.jpg
    7984358_1_I.jpg
    32.5 KB · Views: 616
  • 7892376_2_I.jpg
    7892376_2_I.jpg
    29.3 KB · Views: 654
  • 7961486_6_I.jpg
    7961486_6_I.jpg
    47.3 KB · Views: 6,933
  • 7522853_1_I.jpg
    7522853_1_I.jpg
    35.3 KB · Views: 1,230
RIP

Opps forgot the pic of the Red/white stripe. Also included a few pics of non-SRT's
 

Attachments

  • 8024798_1_I.jpg
    8024798_1_I.jpg
    32.4 KB · Views: 557
  • 6400240_2_I.jpg
    6400240_2_I.jpg
    33.7 KB · Views: 7,948
  • 7393909_4_I.jpg
    7393909_4_I.jpg
    34.5 KB · Views: 2,200
MMMMMM....Yummy....Spare parts...:D
Looking to upgrade mine soon with some factory SRT parts... I’ve been talking to these guy's about a complete rear end set up.

X2 Builders - wrecked dodge vipers for sale Then click on parts for Sale-Ram SRT10

You can't beat the factory SRT parts. Not wanting to be a knock off but I’m looking for parts. Mainly the rear/front suspension set up, seats and gauges, that's all.
 
those 2 black ones hurt just lookin at them, dam
 
That's just downright depressing. :(Pour a little motor oil on the ground for the deceased rigs. Then go in the garage and look at yours with a smile :)because now it's worth that much more.
 
3D3HA16H75G776851 Black clear title, says front end damage
3D7HA18HX6G199715 Red
3D7HA18H55G834340 Silver
3D3HA16H55G733917 Silver w/tape on window
3D3HA18H15G856000 No Pic Yet
3D3HA16H74G278051 Black Hard Hit
3D3HA16H74G235278 Red/White stripes

I'll try to get more organized, but here are a few more I found. Makes ours worth more, fewer on the road.

Did Viper Jeff get this info yet?
Thank you for your efforts. The more complete the registry is, the better we all are.
 
Did Viper Jeff get this info yet?
Thank you for your efforts. The more complete the registry is, the better we all are.

I did see it, I will get them entered when I get home from California. Any VIN I can get and know the status really helps... I thank you all, keep this thread going, as stated helps make all the living ones, that more precious
 
New Additions

3D3HA18H56G210203 BURN RED
3D3HA18H15G856000 BURN SILVER LISTED VIN LAST WEEK W/O PIC
3D3HA16H64G254405 SILVER REG CAB
I almost missed the Red burned one. The VIN gave it away.
 

Attachments

  • 6428682_2_I.jpg
    6428682_2_I.jpg
    40 KB · Views: 3,325
  • 8048642_1_I.jpg
    8048642_1_I.jpg
    35.5 KB · Views: 5,030
  • 8061282_3_I.jpg
    8061282_3_I.jpg
    38.7 KB · Views: 498
Thanks....


At least it's good to know where some of the lost ones are and how they went
 
MMMMMM....Yummy....Spare parts...:D
Looking to upgrade mine soon with some factory SRT parts... I’ve been talking to these guy's about a complete rear end set up.

X2 Builders - wrecked dodge vipers for sale Then click on parts for Sale-Ram SRT10

You can't beat the factory SRT parts. Not wanting to be a knock off but I’m looking for parts. Mainly the rear/front suspension set up, seats and gauges, that's all.

Honestly you dont want our rear axle. Get a DTS axle instead.

DTS - Drive Train Specialists

If you are set on the axle from the 10 then ask here in the wanted section. Im sure someone that has swapped for a DTS would sell you theres for much less than X2 would sell you one for.
 
The first 3 the silver one all the way to the right . Thats one of those real rare silver ones right . I think there is only a couple of them made its a 06
 
The first 3 the silver one all the way to the right . Thats one of those real rare silver ones right . I think there is only a couple of them made its a 06

It's got an 05 nose. The emblem is on the top of the grill instead of at the cross section in the middle :eek:
 
It's got an 05 nose. The emblem is on the top of the grill instead of at the cross section in the middle :eek:

Yea i didnt notice that . The holes for the headlights just looked bigger . Plus it didnt have the bed cover
 
Honestly you dont want our rear axle. Get a DTS axle instead.

DTS - Drive Train Specialists

If you are set on the axle from the 10 then ask here in the wanted section. Im sure someone that has swapped for a DTS would sell you theres for much less than X2 would sell you one for.

Thanks for the information.
The SRT-10 rears are Dana 60 so they are tougher than the 9.25, a plus.
They have the 3rd shock set-up for wheel hop control, a plus.
They look to have a built in slapper to control axle wind up, a plus.
The 05 has the 4.56 gear, a plus.
The leaf is on the bottom of the axle thus its lower, a plus.
Not sure but I believe the rear brakes are better.
Cover is finned for better cooling, a plus.
The complete rear can be purchased for under a grand so for the price and performance increase I think that it's really not a bad deal. I might be wrong.:dontknow:

I'm going to do some more research. Thanks again!
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top