Heads Cam Package

[Pirana131313]

Selling my heads cam package. No need to sell but it will be sold.

-Ported Heads with Big valves, springs, locks etc
-Hardened pushrods
-Custom ground Comp Cam
-Cometic Head gaskets .027" for compression bump
-Ported and Powdercoated Intake Manifold
-2nd Gen Mopar slow bleed lifters
-Intake manifold gaskets

Valves are 2.10 intake 1.60 exhaust.
Will not separate any items, package is sold as one.
This will put your truck at ~600whp
Asking $5,000 shipped, which is a steal. It would be over $7,000 for somebody to do this piece by piece.


Any questions, feel free to ask. More pictures upon request.
Best way to get ahold of me is 419-957-0857.
-AJ.

 

[oldcolt]

Who did the porting work on the heads and intake?

 

[Pirana131313]

The Heads were ported Lou from EZ breathing cylinder heads.

 

[oldcolt]

Thanks!

 

[Pirana131313]

Bump.

 

[Pirana131313]

Price bump $4700

 

[JTS VENOM PERFORMANCE]

killer deal man, I will ask around also, good luck with the sale:beer:

 

[Bigtymerbaumann]

Christmas is close ill let the wife know.

 

[stealth78]

Who did the porting work on the heads and intake?

Just so you or anybody knows, Lou is a great guy and he's been porting heads for over 20 years and he loves Mopar. These were my heads & cam package that unfortunately never got installed because I sold my old truck to Andy right before I did the install. Lou's computer program was coming up with 710 HP at the flywheel with all of these exact items factored in.

 

[stealth78]

This is really a kick in the nuts as I would have bought these back in a second for my current SRT ram, but I just bought myself another Viper 3 weeks ago. My "fun money" is a bit low right now.

 

[stealth78]

Also to aid Pirana in the sale, the custom ground cam and springs was from JMB Justin, he actually had conversations with Lou when he was porting the heads. I wish I could remember the flow numbers but they were somewhere a bit north of 300.

 

[stealth78]

Who did the porting work on the heads and intake?

Missed the second part of this... intake was originally ported and powder coated by Scott, then Lou had to re-do all of the port work on the intake as well. This was my astounding $1,750 intake manifold, seriously!

 

[oldcolt]

Missed the second part of this... intake was originally ported and powder coated by Scott, then Lou had to re-do all of the port work on the intake as well. This was my astounding $1,750 intake manifold, seriously!

Ouch!

 

[Pirana131313]

killer deal man, I will ask around also, good luck with the sale:beer:

Thanks man, it really is a great deal.

 

[Pirana131313]

Also to aid Pirana in the sale, the custom ground cam and springs was from JMB Justin, he actually had conversations with Lou when he was porting the heads. I wish I could remember the flow numbers but they were somewhere a bit north of 300.

Thanks man.

 

[Pirana131313]

Bump. Everything is still for sale. I am firm on $4,700.

 

[Pirana131313]

Bump.

 

[NukeGM/Ford]

Do you guys have to get a special cam if this setup went on a blower motor or would that cam work?

 

[stealth78]

Do you guys have to get a special cam if this setup went on a blower motor or would that cam work?

That cam was specifically set up for an N/A application. Would it work? Probably. Is it the best cam for forced induction? No

 

[Pirana131313]

Bump.