I am Unable to Comment and Change The Track in MS PowerPoint!

[Kelton Greenfelder]

Greetings! I'm new around here, and this is my first post. Actually, I couldn't find a suitable location to start a topic. So, I'm posting the thread here.

I made a project in Microsoft PowerPoint. But I am having a serious problem with Microsoft PowerPoint while commenting and tracking the changes. However, when I attempted to track changes and comment, it failed. I couldn't come up with a generic solution to the problem. So I searched online and came across this particular post. I do not understand if this method might be helpful or not. Can anyone confirm me?

 

[ViperJeff]

Sure, grab a 5lb sledge hammer and with all the effort you can muster. Swing the hammer directly down on the computer. If you don’t see multiple pieces fling through the air, repeat.

 

[Kelton Greenfelder]

Sure, grab a 5lb sledge hammer and with all the effort you can muster. Swing the hammer directly down on the computer. If you don’t see multiple pieces fling through the air, repeat.

I don't understand what type of joke it is. I am having this issue, so I am posting the thread here. Anyway thanks for your reply.

 

[Kelton Greenfelder]

I will be grateful if anyone is willing to assist me.

 

[ViperJeff]

Have you checked your fluids, blinker fluid low will cause the problem you are talking about. Also check the wire bundle on the right side of the bay, it gets hot and brittle. Still think the hammer will fix all your issues

 

[AMS3]

Have you checked your fluids, blinker fluid low will cause the problem you are talking about. Also check the wire bundle on the right side of the bay, it gets hot and brittle. Still think the hammer will fix all your issues

BWAAAAAAAAHHHHHH!!!!

 

[rottenronnie]

You need to change the name to include BOTH: VTCOA/Microshaft PP Help Center.

 

[andrew heywood]

hahahaha fkn love you guyz....